技术资料

正河源刀柄 BT JT DT CAT HSK 筒夹 刀柄数控刀具

2020-07-22 16:47:14 daoju 3

数控刀具数控刀具数控刀具

数控刀具数控刀具

正河源刀柄 BT JT DT CAT HSK 筒夹 刀柄数控刀具 DAT

Precision Tool Holder Systems 参 考资料

DIN

69871

DIN69871/DAT A

60°±15´

ø7

3.2

DIN 69871/DAT AD+B

±3

A 20°

35º

-0.1

-0.5

±0.05

Max.

H7

-0.3

min.

-0.4

max.

DAT30

59.30

44.30

47.8

33.5

DAT40

63.55

72.30

56.25

68.4

42.5

DAT50

97.50

69.85 107.25 91.25

101.75

61.5

M24

A130 D AT/ML D 直 式筒夹铣床夹头

PAT NO. M447277

PAT NO. M430337

DAT/MLD MULTI-LOCK MILLING CHUCK

- 内孔特殊沟槽设计,防止所夹持刀具脱刀滑落,可以割断附著油膜,不会有脱刀现象产生,提高了使用的安全性

- 刀杆本体厚,可产生充分的夹持力。採用滚针轴承原理设计,滚动磨擦及脱落减到小,装置操作省力便捷

- 螺帽与刀杆端面锁固后,紧贴牢靠,提高刚性并彻底的防尘

- 偏摆精度 :0.001~0.005 以内,真圆度 :0.02mm

- There is a special design for the slots of internal hole. It prevents

the cutting tools from slipping and increases the clamping power.

- The body of the tool holder is thick, so it has good clamping

power. It adopts the needle bearing design to prevent the slipping.

The operation is convenient and easy.

- After locking the cutting tool (The tolerance of the cutting tool

must be less than h6), it is more contacted with the flange while

locking the clamping nut and tool holder. It can prevent the bearing

cage from deformation easily. Also, rigidity and dust-proof function is improved.

- Run-out: Within 0.001~0.005mm. Concentricity: 0.02mm.

使用 MLD 止水环可使冷却液从刀具排出,利于散热及有效排屑

When using MLD sealed cap, the coolantfluid discharges from the cutting tool.It's

good for heat dissipation and metal chips removal.

DAT30 x MLD20 - 85

DAT30 x MLD20 - 100

DAT40 x MLD20 - 85

DAT40 x MLD20 - 135

DAT40 x MLD32 - 105

DAT40 x MLD32 - 135

DAT50 x MLD20 - 105

DAT50 x MLD20 - 150

DAT50 x MLD32 - 105

DAT50 x MLD32 - 135

止水端盖 Sealed Cap

A131 D AT/E R 立 铣刀夹头

DIN ISO-15488

PAT NO. M298033

PAT NO. M311791

PAT.NO. ZL200620132661.0 69871

DAT/ER COLLET CHUCK

- 筒夹样式有弹性、止水、刚性攻牙、伸缩攻牙、极小内孔、烧结式热膨胀可供选择

- 弹性筒夹偏摆精度有标准级 (0.02mm 以内 ),A 级 (0.01mm 以内 )

,UP(0.005mm 以内 )

- 螺帽预设动平衡设计,可在 RPM10,000 下使用

-There are various features for collet, like flexibility, water sealed, rigid tapping,

extend tapping, minimized inner hole, shrink-fitting for your selection.

- The ER collet has three kinds of classes for precision : general class 0.02mm, A

class 0.01mm, and UP class 0.05mm.

-The pre-balance can reach 10000rpm.

-The tool holder is through-hole, which is better for waterto get through and

-Additional selection if stop screw is needed.

-When using, please put the collet into the nut and then put them into the body

together.

-It must exceed the effective clamping length of collet when inserting

the cutter into collet to avoid the improper lock & damage.

-Please use the right wrench on installation to avoid the improper lock and

damage.

使用筒夹

Size Range

DAT40 × ER11A - 80

DAT40 × ER11A - 125

DAT40 × ER16A - 70

1~10

DAT40 × ER16A - 100

DAT40 × ER16A - 125

DAT40 × ER16A - 150

DAT40 × ER16A - 180

DAT40 × ER20A - 70

DAT40 × ER20A - 100

DAT40 × ER20A - 135

1.95

DAT40 × ER20A - 160

DAT40 × ER25 - 70

1~16

DAT40 × ER25 - 100

DAT40 × ER25 - 150

DAT40 × ER25 - 180

DAT40 × ER25 - 200

2.55

DAT40 × ER32 - 70

49.7

DAT40 × ER32 - 100

49.5

DAT40 × ER32 - 135

DAT40 × ER32 - 150

2.65

DAT40 × ER40 - 70

ER40

3~26

DAT40 × ER40 - 100

DAT40 × ER40 - 135

3.30

DAT40 × ER50 - 100

ER50

5~34

A132 D AT/E R 立 铣刀夹头

DAT50 × ER16A - 100

3.20

DAT50 × ER16A - 135

DAT50 × ER16A - 160

DAT50 × ER16A - 180

DAT50 × ER20A - 100

3.40

DAT50 × ER20A - 135

3.60

DAT50 × ER20A - 160

DAT50 × ER25 - 70

DAT50 × ER25 - 100

DAT50 × ER25 - 150

DAT50 × ER25 - 200

DAT50 × ER32 - 80

DAT50 × ER32 - 120

DAT50 × ER32 - 160

4.75

DAT50 × ER32 - 200

DAT50 × ER40 - 80

DAT50 × ER40 - 120

DAT50 × ER40 - 160

DAT50 × ER40 - 200

DAT50 × ER50 - 80

DAT50 × ER50 - 120

DAT50 × ER50 - 160

DAT50 × ER50 - 200

179

A133 D AT 伸 缩 E R 攻牙器

DAT EXPANSION ER TAPPER

6.5mm

5mm

- 伸长 6.5mm,收缩 5mm

- 搭配刚性攻牙筒夹,使用效果大增

- Elonggates 6.5mm, contracts 5mm.

- Match the rigid tap collets, the effect greatly to increase.

攻牙能力

DAT40 × ETP16A-120

M3~M10

DAT40 × ETP16A-150

DAT40 × ETP20A-100

M3~M16

DAT40 × ETP20A-150

DAT40 × ETP20M-200

DAT40 × ETP32 -120

M3~M27

DAT50 × ETP16A-120

DAT50 × ETP16A-150

DAT50 × ETP20A-100

DAT50 × ETP20A-150

DAT50 × ETP20M-200

DAT50 × ETP32 -120

4.65

D AT/SPU 直 结式鑽夹头

DAT/SPU DRILL CHUCK ADAPTER

- The series type design, enhances the use effect.

- The SPU leaning precision is 0.04mm, like the need high accuracy

request, please use ER or the SKS series.

- 直结式设计,提高使用效果

- SPU 偏精度为 0.04mm,如需更高精度要求,请使用 ER

或 SKS 系列

3.43

4.73

DAT40 × SPU8-75

DAT40 × SPU13-100

DAT40 × SPU16-115

DAT50 × SPU8-75

DAT50 × SPU13-100

DAT50 × SPU16-105

附扳手 Attaches the spanner.

A291/A294

A134

夹持范围 Clamp Range

R D AT 斜 柄鑽头套筒

DIN 228-2

DIN 6383

DAT MORSE TAPER ADAPTER

DAT40 × MTA1 - 50

DAT40 × MTA2 - 50

DAT40 × MTA3 - 70

84

DAT40 × MTA4 - 95

DAT50 × MTA1 - 45

DAT50 × MTA2 - 60

DAT50 × MTA2-135

DAT50 × MTA3 - 65

DAT50 × MTA3-150

DAT50 × MTA4 - 95

DAT50 × MTA5 - 105

D AT 斜 柄鑽头套筒

DIN 228-A

- 高精密的运作过程,即使长时间鑽孔,同心圆仍然在

0.015mm 之内

-High accurate working process.Even though usingprolonged

drill,the concentricity is still within 0.015mm.

DAT40 × MTB2 - 45

M10X1.5P

DAT40 × MTB3 - 75

M12X1.75P

DAT40 × MTB4 - 100

DAT50 × MTB2 - 45

DAT50 × MTB3 - 65

DAT50 × MTB4 - 75

DAT50 × MTB4 - 95

DAT50 × MTB5 - 105

M24X3.0P

A135 D AT 平 面铣刀柄

DAT FACE MILL ARBOR(TYPE FMA)

- 预设动平衡达 G6.3 8000rpm,不含检测报告

- 若需更好的动平衡,须另外加价

- d1 tolerance is h6.

- Dynamic balancing G6.3 at 8000rpm, without an inspection report.

- The balancing grade and revolution can be done according to

customer request but the additional charge is needed.

DAT50 × FMA31.75-50

DAT50 × FMA38.1-100

15.875

D AT/FMB 平 面铣刀柄 ( 加长斜度柄 )

DAT/FMB FACE MILL ARBOR(EXTENSION TYPE)

DIN 6537-B

-The balancing grade and revolution can be done according to

DAT50 × FMB22-100BG

DAT50 × FMB22-150BG

DAT50 × FMB22-200BG

6.74

DAT50 × FMB22-250BG

DAT50 × FMB22-300BG

A136 D AT 平面铣刀柄

DIN 6357-B

DAT FACE MILL ARBOR(TYPE FMB)

- The pre-balance can reach G6.3 8,000 rpm, without an inspection report.

DAT40 × FMB22-35

DAT40 × FMB22-60

DAT40 × FMB22-100

DAT40 × FMB22-150

DAT40 × FMB27-60

DAT40 × FMB32-60

DAT40 × FMB40-60

DAT50 × FMB22-35

DAT50 × FMB22-75

3.72

DAT50 × FMB22-90

DAT50 × FMB22-150

DAT50 × FMB22-200

DAT50 × FMB27-35

DAT50 × FMB32-35

DAT50 × FMB40-50

DAT50 × FMB50-60

9.7

DAT40 × FMB40F-60

DAT50 × FMB40F-70

DAT50 × FMB60F-70

129

DAT40 × FS40 -60

DAT50 × FS40 -70

DAT50 × FS60 -70

A137 D AT 侧 固式立铣刀柄

DAT SIDE LOCK END MILL HOLDER

0.97

DAT40 × SLN6-50

DAT40 × SLN8-50

DAT40 × SLN10-50

DAT40 × SLN12-50

DAT40 × SLN16-63

DAT40 × SLN20-63

DAT40 × SLN25-100

M18×2.0P

DAT40 × SLN32-100

DAT50 × SLN6-63

DAT50 × SLN8-63

DAT50 × SLN10-63

DAT50 × SLN12-63

3.35

DAT50 × SLN16-63

3.45

DAT50 × SLN20-63

3.47

DAT50 × SLN25-80

DAT50 × SLN32-100

DAT50 × SLN40-100

DAT50 × SLN42-100

DAT50 × SLN50-125

DAT50 × SLN63-150

A138 D AT/MC K 搪孔刀柄

DAT/MCK BORING HEAD SHANK

- 内孔公差 H6

- 可共用并互容于大多数 "CK" 系列

- 侧边锁固螺丝与键槽呈 90 度,确保搪孔切削机能时的退刀相位

- 锁固时请使用螺丝防卡油防止因搪孔加工扭力过大,导致螺丝卡死难

- The tool holder is through-one, which is better for water to get

through and vibration resistance.

- Compatible on most "CK" series

- 90 degree between the slide lock screw & notch, ensure the correct

position of cutter when the cutter go back.

- Due to big boring torque, please apply the grease when screwing

to avoid the screw jammed shut.

27.9

50.9

65.9

DAT40 × MCK2-80

DAT40 × MCK2-110

80.9

DAT40 × MCK3-90

DAT40 × MCK3-125

100.9

DAT40 × MCK4-80

55.9

DAT40 × MCK4-110

85.9

DAT40 × MCK5-95

75.4

DAT40 × MCK5-110

90.4

DAT40 × MCK6-65

45.4

DAT40 × MCK6-95

DAT50 × MCK1-110

DAT50 × MCK1-125

95.9

3.15

DAT50 × MCK2-95

DAT50 × MCK2-125

3.25

DAT50 × MCK3-125

DAT50 × MCK3-155

125.9

DAT50 × MCK4-110

DAT50 × MCK4-125

DAT50 × MCK5-65

35.9

DAT50 × MCK5-140

110.9

3.55

DAT50 × MCK6-140

DAT50 × MCK6-170

140.9

DAT50 × MCK7-95

DAT30 × MCK1-50

DAT30 × MCK2-65

42.9

DAT30 × MCK3-50

DAT30 × MCK4-50

DAT40 × MCK1-80

DAT40 × MCK1-95

A139 D AT/NBH DA T/BST 搪孔刀柄

DAT BORING HEAD SHANK(PRECISION)

NBH/BST

14 12

-Dynamic balancing G6.3 at 8000rpm, without an inspection report.

DAT40×NBH2084A

DAT50×NBH2084A

PCD.Ø60

4-M8 x 1.25P

FR60×NBH2084

DAT40×NBH2084B-100

DAT50×NBH2084B-100

DAT50×NBH2084B-200

DAT50×BST-100

DAT50×BST-150

DAT50×BST-200

DAT50×BST-250

DAT50×BST-350

DAT50×BST-400

11.00

8.75

9.76

12.8

PCD.Ø72

4-Ø13

A332

A340

A358

A367

A370

DAT40 - TS300L

※ DAT30 与 BT30 共用;DAT50 与 BT50 共用

A140

DAT30 and BT30 can be used in common. DAT50 and BT50 can be used in common. CAT

Precision Tool Holder Systems C AT 精 密刀杆系列

ANSI

B5.50

CAT PRECISION TOOL HOLDER SERIES

M 型 CAT/ER

CAT/ETP

CAT 套筒

※ 详细规格欢迎来电洽询

Please feel free to contact us for more detailed spec.

A142 NT

2080

NT

±0.15

NT30

17.04

1/2"-12W, M12×1.75P, 1/2"-13UNC

NT40

24.92

93.4

5/8"-11W, M16×2.0P

NT50

97.5

39.19

126.8

1"-8W, M24×3.0P

6. 本体规范 : DIN 2080

6. Shank body standard : DIN 2080

7. 刀杆有预设标准动平衡 G6.3,可另外指定精密动平衡

7.The shank has pre-balance at G6.3,and can provide

percision balance at G2.5,made by request.

G2.5

A144 N T/ML C 直式筒夹铣床夹具组

NT/MLC STRAIGHT COLLET MULTI-LOCK COLLET CHUCK FULL SET

※ 订购前请确认本体拉杆牙数为公制或英制 Please in front DRAW BAR'S size when purchasing holder.

NT30 × MLC20 × 5PCS

NT40 × MLC32 × 7PCS

NT50 × MLC32 × 7PCS

NT50 × MLC42 × 8PCS

内附筒夹 Collet

本体拉杆牙数 Draw Bar

6, 8, 10, 12, 16mm

M12×1.75P, 1/2"W12

M16×2.0P, 5/8"W11

6, 8, 10, 12, 16, 20, 25mm

6, 8, 10, 12, 16, 20, 25, 32mm

NT30 × MLC20

NT40 × MLC32

型式

No.

本体

NT50 × MLC32

NT50 × MLC42

MLC20-W

MLC32-W

MLC42-W

0.33

M24×3.0P, 1"W8

13.50

SSC-20

SSC-32

SSC-42

筒夹内径

6, 8, 10, 12, 16

6, 8, 10, 12, 16, 20, 25

3, 4, 5, 14, 18, 24, 1/8, 1/4,

5/16, 3/8, 1/2, 5/8, 3/4, 1"

6, 8, 10, 12, 16, 20, 25, 32

0.10

1/4, 5/16, 3/8, 1/2,

5/8, 3/4, 1"

-附扳手 Attaches the spanner.

E OC/OZ 铣 床夹头组

EOC/OZ MILLING CHUCK SET

MTB2 × EOC25 × 7M × SYOZ

3/8"W16,M10×1.5P

MTB3 × EOC25 × 7M × SYOZ

1/2"W12,M12×1.75P

MTB4 × EOC25 × 7M × SYOZ

5/8"W11,M16×2.0P

7/16"NF20

NT30 × EOC25 × 7M × SYOZ

3.44

NT40 × EOC25 × 7M × SYOZ

NT50 × EOC25 × 7M × SYOZ

1"W8,M24×3.0P

R8 × EOC25 × 7M × SYOZ

SYOZ25-6, 8, 10, 12, 16, 20, 25mm

本体牙数 Draw Bar

A145 E OC/OZ 铣 床夹头组

DIN 6388

本体牙数

Draw Bar

MTB4 × EOC32 × 8M × B

5/8"W11 or M16 × 2.0P

MTB5 × EOC32 × 8M × B

1"W8 or M24 × 3.0P

9.07

9.45

10.70

内附筒夹

Collet Set

6, 8, 10, 12,

16, 20, 25, 32mm

NT40 × EOC32 × 8M × B

NT50 × EOC32 × 8M × B

MTB4 × EOC32 × 16M × B

5, 6, 7, 8, 9, 10, 11, 12,

13, 14, 15, 16, 18, 20,

25, 32mm

MTB5 × EOC32 × 16M × B

NT40 × EOC32 × 16M × B

10.80

NT50 × EOC32 × 16M × B

E OC 立 铣刀夹头

EOC COLLET CHUCK

t1

MTB3 × EOC25

81

M48×2.0P

MTB4 × EOC25

102.5

R8 × EOC25

NT30 × EOC25

59.6

NT40 × EOC25

54.6

NT50 × EOC25

58.2

MTB4 × EOC32

71.5

M60×2.5P

MTB5 × EOC32

129.5

NT40 × EOC32

81.6

NT50 × EOC32

A146

Fig. E R 铣 床夹头组

PAT NO.M298033

PAT NO.M311791

PAT NO.ZL200620132661.0

ER MILLING CHUCK SET

- 套装价格小径筒夹不另加价

- 套装价格 =( 筒夹 × 数量 )+ 包装盒 + 扳手 + 本体

- 下订单前请先决定拉杆规格及筒夹数量

- Collets of small sizes in the whole set are not added price.

- Whole set = (ER collet × Q'yt)+spanner+body+box.

- Please inform us the DRAW BARIIs size when making an order.

MTB3 × ER32 × 6PCS

MTB4 × ER32 × 6PCS

R8 × ER32 × 6PCS

7/16" NF20

6, 8, 10,

12, 16, 20mm

NT30 × ER32 × 6PCS

MTB3 × ER40 × 7PCS

NT30 × ER40 × 7PCS

NT40 × ER40 × 7PCS

MTB3 × ER32 × 18PCS

8.45

11.25

MTB4 × ER40 × 7PCS

R8 × ER40 × 7PCS

MTB4 × ER32 × 18PCS

R8 × ER32 × 18PCS

NT30 × ER32 × 18PCS

16, 20, 25mm

3, 4, 5, 6, 7, 8,

9, 10, 11, 12,

13, 14, 15, 16,

17, 18, 19, 20mm

NT40 × ER32 × 18PCS

MTB4 × ER40 × 23PCS

R8 × ER40 × 23PCS

NT30 × ER40 × 23PCS

NT40 × ER40 × 23PCS

4, 5, 6, 7, 8, 9, 10,

11, 12, 13, 14, 15, 16,

17, 18, 19, 20, 21, 22,

23, 24, 25, 26mm

NT50 × ER40 × 23PCS

NT40 × ER50 × 17PCS

9.20

11.95

MTB3 × ER40 × 15PCS

6.45

MTB4 × ER40 × 15PCS

NT50 × ER50 × 17PCS

R8 × ER40 × 15PCS

6, 7, 8, 9, 10, 12, 14, 16, 18, 20, 22, 24,

26, 28, 30, 32, 34mm

4, 5, 6, 8, 10,

12, 13, 15, 16, 18,

20, 21, 23, 25, 26mm

NT40 × ER40 × 15PCS

NT50 × ER40 × 15PCS

NT30 × ER40 × 15PCS

A147 N T/E R 铣 床夹头柄

NT/ER COLLET HOLDER

- NT 本体后端有塑胶套环设计,有效的保护机器主轴避免碰伤

- 订购前请先确认本体拉杆牙数为公制或英制

- At the end of body, there's a plastic ring protecting the spindle form damage.

- Please inform DRAW BAR's size when purchasing holder.

NT30 × ER16A - 45

NT30 × ER20A - 45

NT30 × ER25 - 55

NT30 × ER32 - 60

1/2” × W12

NT30 × ER40 - 75

NT40 × ER16A - 45

NT40 × ER20A - 45

NT40 × ER25 - 55

NT40 × ER32 - 60

NT40 × ER40 - 70

5/8” × W11

NT40 × ER50 - 80

NT50 × ER32 - 75

NT50 × ER40 - 80

NT50 × ER50 - 80

R8 × ER16A - 38

R8 × ER32 - 60

R8 × ER40 - 65

M24 × 3.0P

1” × W24

7/16” NF20

DRILL CHUCK INTEGRATED TYPE

NT30×SPU13-100

M12 x 1.75P

NT40×SPU13-90

M16 x 2.0P

NT50×SPU13-120

M24 x 3.0P

A148 ISO

Precision Tool Holder Systems I S O/E R 立 铣刀夹头

ISO/ER COLLET CHUCK(FOR W/OUT SLOTS)

- 无键槽适用于高转速下使用

- 动平衡校正 G2.5 36000rpm

- Is suitable without the key solt under the high speed uses.

- Dynamic balancing G2.5 at 36000rpm.

ISO20 × ER11A - 52

21.642

M6× 1.0P

ISO20 × ER16AD - 52

0.22

( 无键槽 )

ISO20 × ER20AD - 52

ISO25 × ER11A - 52

24.91

ISO25 × ER16A - 52

ISO25 × ER20A - 52

ISO30 × ER11A - 80

ISO30 × ER16A - 63

ISO30 × ER20A - 63

ISO30 × ER25 - 63

0.67

ISO30 × ER32 - 63

ISO30 × ER40 - 57

I S O/E R 高 速刀把

ISO/ER HIGH SPEED COLLET CHUCK

- 标准动平衡 G2.5 40000rpm

-Dynamic balancing G2.5 at 40000rpm.

ISO20×ER16M-35HG

27.2

ISO20-W

ER16-MHG-W

ER16-MHG

ISO25×ER16M-36HG

ISO25-W

ISO25×ER20M-36HG

ER20-MHG-W

ER20-MHG

ISO30×ER16M-60HG

40.9

ISO30-W

ISO30×ER20M-60HG

ISO30×ER25M-60HG

ER25-MHG-W

ER25-MHG

锁刀座 Locking Device

Precision Tool Holder Systems

69893-A

d8

d7

b2

b1

b3

1:9.98

(2°52'5")

HSK25

HSK32

H10

H11

19.006

24.007

HSK40

30.007

HSK50

HSK63

HSK80

±0.04

2.5

7.05

8.05

10.54

72.3

8.4

6.3

12.54

88.8

10.2

16.04

109.75

20.02

111 134.75

25.02

28.5

20.5

25.5

38.009

59.3

48.010

60.012

HSK100 100 75.013

HSK125 125 95.016

2. 硬度 : > HRC 56°

4. 真圆度 : < 0.6μm

6. 刀杆有预设标准动平衡 G6.3,可另外指定精密动平衡 G2.5

A152

7. 本体规范 : DIN 69893-1

Min.

h10

3. Carbon depth > 0.8mm.

4.Roundness < 0.6μm.

6.The shank has pre-balance at G6.3,and can provide

7.Shank body standard : DIN69893-1 参 考资料

HSK100

HSK125

75.013

95.016

134.75

7. 本体规范 : DIN 69893-E

7.Shank body standard : DIN69893-E

A153 参 考资料

ø12H8

ø5

A154

7. 本体规范 : DIN 69893-F

7.Shank body standard : DIN69893-F H SK/SBL 后拉式立铣刀夹头

DIN 69893/ISO 12164

PAT.NO: M274178

HSK/SBL SLIM-FIT COLLET CHUCK(FOR TYPE A)

HSK50A × SBL6-120

HSK50A × SBL12-110

HSK50A × SBL12-130

HSK50A × SBL20-120

HSK50A × SBL20-150

HSK63A × SBL6-80

HSK63A × SBL6-120

HSK63A × SBL12-110

HSK63A × SBL12-150

HSK63A × SBL20-120

HSK63A × SBL20-140

HSK100A × SBL12-120

HSK100A × SBL20-135

2.74

HSK50A × SBL6-80

-HSK25E-32E-40E-50E-63E-63F 可接受订製 HSK25E-32E-40E-50E-63E-63F may accept ordering.

H SK/SBL 后拉式立铣刀夹头

HSK/SBL SLIM-FIT COLLET CHUCK(FOR TYPE E)

°

- The balancing garde reaches the revoluting of G2.5 25000rpm.

HSK50E × SBL6-80

19.188

HSK50E × SBL12-110

HSK50E × SBL20-110

HSK50E × SBL20-120

给水管 Coolant Supply Unti

A176

A155 H SK/ML K 强力铣削夹头

HSK/MLK FORCE COLLET CHUCK

HSK63A × MLK32-120

2.53

HSK100A × MLK32-120

HSK/MLD MULTI-LOCK MILLING CHUCK(STRAIGHT COLLET)

DIN 69893

NO.M430337

H SK/ML D 直式筒夹铣床夹头

- 偏摆精度 :0.001~0.005 以内, 真圆度 :0.02mm

- 预设动平衡至 G6.3 8000rpm,可依照客户指定动平衡等级及转速,

并附检验报告,但需另外付费

-Run-out: Within 0.001~0.005mm. Concentricity: 0.02mm.

-Dynamic balancing G6.3 at 8000rpm., with aninspection

report. The balancing grade and revolution canbe done according

to customer request but the additional charge is needed.

HSK50A × MLD20 - 120

HSK50A × MLD32 - 130

HSK63A × MLD20 - 120

HSK63A × MLD32 - 120

2.54

HSK100A × MLD20 - 120

HSK100A × MLD32 - 120

Note: To avoid the improper clamping ( no clamp at all) & damage and deformation for collect, it should exceed the effective length of

collet when installing the cutter onto collet.

扳手 Spanner 给水管 Coolant Supply Unti

A176 LHC

GERMANY H S K/L H C 扭力型液压刀杆

HSK/LHC TORQUE HYDRAULIC TOOLHOLDER

52.5

HSK63A-LHC12-80

HSK63A-LHC16-80

HSK63A-LHC20-80

● HSK100A-LHC20-90

● HSK100A-LHC32-100

●-接单生产 Made to order.

H SK/L H C 精 密型液压刀杆

HSK/LHC PRECISION HYDRAULIC TOOLHOLDER

HSK63A-LHC32-125-P

A176 H SK/PNE R 立铣刀夹头

HSK/PNER COLLET CHUCK(FOR TYPE A)

HSK32AxPNER16-50

HSK32AxPNER20-60

HSK40AxPNER16-60

0.36

HSK40AxPNER20-60

0.37

HSK40AxPNER25-60

0.47

HSK40AxPNER32-70

HSK50AxPNER16-60

HSK50AxPNER20-60

HSK50AxPNER25-60

32.5

HSK50AxPNER32-70

HSK50AxPNER40-80

HSK63AxPNER16-60

HSK63AxPNER16-100

HSK63AxPNER16-130

HSK63AxPNER16-160

HSK63AxPNER20-60

HSK63AxPNER20-100

HSK63AxPNER20-130

HSK63AxPNER20-160

HSK63AxPNER25-100

HSK63AxPNER25-130

HSK63AxPNER25-160

HSK63AxPNER32-100

HSK63AxPNER32-130

HSK63AxPNER32-160

HSK63AxPNER40-100

HSK63AxPNER40-130

HSK63AxPNER40-160

HSK80AxPNER32-100

HSK80AxPNER40-120

HSK100AxPNER16-100

HSK100AxPNER20-100

HSK100AxPNER25-100

HSK100AxPNER32-100

HSK100AxPNER40-100

A270-A271 A284-A285

A159 H SK/E R 立 铣刀夹头

HSK/ER COLLET CHUCK(FOR TYPE A)

DIN 6499/ISO 15488

HSK 40A × ER20A-80

HSK 40A × ER25-80

HSK 50A × ER16A-80

HSK 50A × ER16A-100

HSK 50A × ER16A-120

HSK 50A × ER20A-80

HSK 50A × ER20A-100

HSK 50A × ER20A-120

HSK 50A × ER25-80

HSK 50A × ER25-100

HSK 50A × ER25-135

HSK 50A × ER32-100

HSK 50A × ER32-135

HSK 50A × ER32-160

HSK 63A × ER16A-80

HSK 63A × ER16A-100

HSK 63A × ER16A-120

HSK 63A × ER16A-160

HSK 63A × ER20A-80

HSK 63A × ER20A-100

HSK 63A × ER20A-120

HSK 63A × ER20A-160

HSK 63A × ER25-80

HSK 63A × ER25-100

HSK 63A × ER25-120

HSK 63A × ER25-150

A160 H S K/E R 立 铣刀夹头

HSK 63A × ER32-80

HSK 63A × ER32-100

HSK 63A × ER32-145

HSK 63A × ER32-160

HSK 63A × ER40-80

HSK 63A × ER40-100

HSK 63A × ER40-120

2.03

HSK 63A × ER40-150

HSK 63A × ER40-170

HSK 63A × ER50-120

HSK 100A × ER16A-80

HSK 100A × ER16A-100

HSK 100A × ER16A-160

HSK 100A × ER20A-80

2.9

HSK 100A × ER20A-100

HSK 100A × ER20A-160

HSK 100A × ER25-100

HSK 100A × ER25-130

HSK 100A × ER32-100

2.92

HSK 100A × ER32-135

HSK 100A × ER32-150

HSK 100A × ER40- 80

HSK 100A × ER40-120

HSK 100A × ER40-175

141

HSK 100A × ER50-100

HSK 100A × ER50-120

A161 H SK/E R 立 铣刀夹头

HSK/ER COLLET CHUCK(FOR TYPE F)

HSK 63F × ER32-70

HSK 63F × ER32-100

HSK 63F × ER40-75

HSK 63F × ER40-100

HSK 63F × ER40-120

2.77

H SK/FMB 平面铣刀柄

HSK/FMB FACE MILL ARBOR(FOR TYPE E)

d 3 K1

- 平面铣刀配合部位 (d1) 轴系公差 h6.

- d1 tolerance: h6.

HSK 40E × FMB22 - 60

0.86

HSK 50E × FMB22 - 60

HSK 50E × FMB27 - 60

A162 H SK/FMB 平面铣刀柄

HSK/FMB FACE MILL ARBOR(FOR TYPE A)

d3 K1

HSK 40A × FMB16 - 50

HSK 40A × FMB22 - 60

HSK 40A × FMB27 - 60

HSK 40A × FMB32 - 60

HSK 50A × FMB16 - 50

HSK 50A × FMB22 - 60

HSK 50A × FMB27 - 60

HSK 50A × FMB32 - 60

HSK 63A × FMB16 - 50

HSK 63A × FMB22 - 50

HSK 63A × FMB27 - 60

HSK 63A × FMB32 - 60

1.98

HSK 63A × FMB40 - 60

HSK 100A × FMB22 - 50

HSK 100A × FMB27 - 50

HSK 100A × FMB32 - 50

HSK 100A × FMB40 - 60

HSK 100A × FMB50 - 70

HSK 100A × FMB60 - 70

A163 H SK/SPU 直 结式鑽夹头

HSK/SPU DRILL CHUCK ADAPTER(FOR TYPE A)

- 本产品因为增加了多层安全性设计,能提供给综合切削中心

机使用,在电脑操作的全自动作业中,以及无人化的管理

整个流程,都能够安全及顺利地进行

- This product adds multi safety design, able to provide for machine

center, in full automatic operation control by computer,and

unmanned management process, can be processed safely and

smoothly.

- 防止夹头脱落

- 内部螺纹锁紧设计

-Avoid chuck falling off.

-Inside with tightening design for thread.

- 可用于重切削及高速切削

- 鑽头绝不脱落

-Attaches the spanner.

-Drill never loosening or falling off.

- 可加工较高工件

- 增加机器使用范围

-It also can process higher workpiece.

-Additional use range of machine.

2.69

HSK 50A × SPU13- 150

HSK 63A × SPU13- 150

HSK 100A × SPU13- 155

A164 H SK/SL N 侧 固式立铣刀柄

PAT.NO: 193405

DIN-1835-B

HSK/SLN SIDE LOCK END MILL HOLDER(FOR TYPE A)

- 内孔精度 : H5

- Internal hole tolerance : H5

HSK 50A × SLN6 - 65

M 6 × 1.0P

HSK 50A × SLN8 - 65

M 8 × 1.25P

HSK 50A × SLN10 - 65

HSK 50A × SLN12 - 80

53.5

HSK 50A × SLN14 - 80

HSK 50A × SLN16 - 80

HSK 50A × SLN18 - 80

HSK 50A × SLN20 - 80

HSK 63A × SLN6 - 65

HSK 63A × SLN8 - 65

HSK 63A × SLN10 - 65

HSK 63A × SLN12 - 80

HSK 63A × SLN14 - 80

HSK 63A × SLN16 - 80

51.5

HSK 63A × SLN18 - 80

HSK 63A × SLN20 - 80

HSK 63A × SLN25 - 110

83.2

2.35

HSK 63A × SLN32 - 110

HSK 100A × SLN6 - 80

HSK 100A × SLN8 - 80

HSK 100A × SLN10 - 80

HSK 100A × SLN12 - 80

HSK 100A × SLN14 - 80

HSK 100A × SLN16 - 100

HSK 100A × SLN18 - 100

HSK 100A × SLN20 - 100

HSK 100A × SLN25 - 100

3.67

HSK 100A × SLN32 - 100

HSK 100A × SLN40 - 120

5.59

A165 HSK/SLNB SIDE LOCK END MILL HOLDER(FOR TYPE A)

DIN-1835-E

H SK/SL NB 侧固式立铣刀柄

t

- 侧固螺丝角度 2°

- The side lock screw angle 2°

HSK 50A × SLNB6 - 80

M5

HSK 50A × SLNB8 - 80

M6

HSK 50A × SLNB10 - 80

M8

HSK 50A × SLNB12 - 90

HSK 50A × SLNB14 - 90

63.2

HSK 50A × SLNB16 - 90

HSK 50A × SLNB18 - 90

HSK 50A × SLNB20 - 100

HSK 63A × SLNB6 - 80

HSK 63A × SLNB8 - 80

HSK 63A × SLNB10 - 80

HSK 63A × SLNB12 - 90

HSK 63A × SLNB14 - 90

HSK 63A × SLNB16 - 100

HSK 63A × SLNB18 - 100

HSK 63A × SLNB20 - 100

HSK 63A × SLNB25 - 110

HSK 63A × SLNB32 - 110

82.5

HSK 100A × SLNB6 - 90

HSK 100A × SLNB8 - 90

HSK 100A × SLNB10 - 90

HSK 100A × SLNB12 - 100

HSK 100A × SLNB14 - 100

HSK 100A × SLNB16 - 100

HSK 100A × SLNB18 - 100

HSK 100A × SLNB20 - 110

HSK 100A × SLNB25 - 120

HSK 100A × SLNB32 - 120

HSK 100A × SLNB40 - 120

A166 H SK/SL N 侧 固式立铣刀柄 ( JIS 型 )

HSK/SLN SIDE LOCK END MILL HOLDER(JIS TYPE)

HSK 63A × SLN10 - 75JIS

HSK 63A × SLN10 - 150JIS

119.154

HSK 63A × SLN12 - 80JIS

HSK 63A × SLN12 - 150JIS

121.101

HSK 63A × SLN16 - 90JIS

HSK 63A × SLN16 - 150JIS

HSK 63A × SLN20 - 90JIS

HSK 63A × SLN20 - 150JIS

HSK 63A × SLN25 - 90JIS

HSK 63A × SLN25 - 150JIS

HSK 63A × SLN32 - 105JIS

A167 H SK/SA C 中 钢炮铣削头

HSK/SAC ANGLE HEAD HOLDER FOR MEDIAL CUTTING

Ø

- 建议大切深 ≤4mm

- Suggest Ap≤4mm

HSK 63A × SAC16E - 155

25N-m

HSK 63A × SAC20E - 155

HSK 63A × SAC25E - 155

HSK 63A × SAC32E - 155

HSK 100A × SAC16E - 151

HSK 100A × SAC20E - 151

HSK 100A × SAC25E - 151

HSK 100A × SAC32E - 151

HSK 63A × SAC25.4FA - 155

HSK 63A × SAC22FB - 155

HSK 100A × SAC25.4FA - 151

HSK 100A × SAC22FB - 151

HSK 63A × SAC22SC - 155

67.5

HSK 63A × SAC25.4SC - 155

HSK 100A × SAC22SC - 151

HSK 100A × SAC25.4SC - 151

A168 H SK/SFC 热膨胀刀杆

HSK/SFC SHRINK-FIT CHUCK(FOR TYPE A)

PAT.NO: M284478

16.7

M5 × 0.8P

HSK50A × SFC10-85

0.07

HSK50A × SFC12-90

HSK50A × SFC14-90

HSK50A × SFC16-95

HSK50A × SFC18-95

HSK50A × SFC20-100

0.92

HSK50A × SFC25-115

HSK63A × SFC3-80

HSK63A × SFC4-80

17.049

HSK63A × SFC5-80

HSK63A × SFC6-80

0.89

HSK63A × SFC8-80

HSK63A × SFC10-85

HSK63A × SFC12-90

HSK63A × SFC14-90

HSK63A × SFC16-95

HSK63A × SFC18-95

HSK63A × SFC20-100

HSK63A × SFC25-115

HSK50A × SFC3-80

HSK50A × SFC4-80

HSK50A × SFC5-80

HSK50A × SFC6-80

HSK50A × SFC8-80

HSK63A × SFC32-120

1.39

HSK100A × SFC6-85

HSK100A × SFC8-85

HSK100A × SFC10-90

2.23

HSK100A × SFC12-95

HSK100A × SFC16-100

HSK100A × SFC20-105

2.51

HSK100A × SFC25-115

3.04

HSK100A × SFC32-120

2.98

A169 H SK/SFC 热膨胀刀杆

HSK/SFC SHRINK-FIT CHUCK(FOR TYPE E)

d3 10

d3 16

HSK25E × SFC3-50

HSK25E × SFC4-50

16.079

HSK25E × SFC5-50

HSK32E × SFC3-50

13.287

HSK32E × SFC4-50

14.287

HSK32E × SFC5-50

HSK32E × SFC6-50

HSK32E × SFC8-60

HSK32E × SFC10-60

HSK32E × SFC12-70

HSK40E × SFC3-80

HSK40E × SFC4-80

HSK40E × SFC5-80

HSK40E × SFC6-80

M5 ×0.8P

HSK40E × SFC8-80

HSK40E × SFC10-85

HSK40E × SFC12-90

HSK50E × SFC3-80

M6X1.0P

HSK50E × SFC4-80

HSK50E × SFC5-80

HSK50E × SFC6-80

HSK50E × SFC8-80

HSK50E × SFC10-80

HSK50E × SFC12-80

HSK50E × SFC16-95

HSK50E × SFC20-100

HSK50E × SFC25-115

A170 H SK/SKS 高 速机专用夹头

HSK/SKS COLLET CHUCK(FOR TYPE A)

PAT.NO: M270871

- Run-out accuracy: within 5µ.

- SKS tapered collet: 4° degrees, increases clamping power and

stability.

HSK50A × SKS10-90

HSK50A × SKS10-120

HSK50A × SKS16-90

HSK50A × SKS16-120

HSK63A × SKS6-90

HSK63A × SKS10-90

HSK63A × SKS10-120

HSK63A × SKS16-90

HSK63A × SKS16-120

HSK63A × SKS25-90

HSK100A × SKS10-100

HSK100A × SKS16-105

HSK100A × SKS25-120

M18 × 1.5P

M28 × 2.0P

1.11

1.33

H SK/SKS 高速机专用夹头 ( 无风阻 )

HSK/SKS COLLET CHUCK(FOR TYPE A) (NON WIND RESISTANCE)

HSK32A × SKS10-60-HS

HSK40A × SKS10-60-HS

A272-A275

A0286

A171 H SK/SKS 高 速机专用夹头

HSK/SKS COLLET CHUCK(FOR TYPE E)

PAT.NO: M270871 69893-A

- Balance of G2.5 at 25000rpm.

HSK50E × SKS10-90

HSK50E × SKS10-120

0.93

HSK50E × SKS16-90

HSK50E × SKS16-120

H S K/SKS 高 速机专用夹头 ( 无风阻 )

HSK/SKS COLLET CHUCK(FOR TYPE E)(NON WIND RESISTANCE)

HSK40E × SKS6-60-HS

HSK40E × SKS10-60-HS

HSK40E × SKS16-90-HS

HSK50E × SKS10-90-HS

HSK50E × SKS10-120-HS

HSK50E × SKS16-90-HS

HSK50E × SKS16-120-HS

A172

A297 H SK/MC K 搪 孔刀柄

HSK/MCK BORING HEAD SHANK(FOR TYPE A)

HSK40A x MCK1 - 50

HSK40A x MCK2 - 60

HSK40A x MCK3 - 60

HSK50A x MCK1 - 60

HSK50A x MCK2 - 60

HSK50A x MCK3 - 60

HSK50A x MCK4 - 60

HSK50A x MCK5 - 80

HSK50A x MCK6 - 80

HSK63A x MCK1 - 80

HSK63A x MCK1 - 95

HSK63A x MCK2 - 80

HSK63A x MCK2 - 110

HSK63A x MCK3 - 90

HSK63A x MCK3 - 125

HSK63A x MCK4 - 80

M8x0.5P

HSK63A x MCK4 - 110

HSK63A x MCK5 - 95

HSK63A x MCK5 - 110

HSK63A x MCK6 - 70

43.5

HSK63A x MCK6 - 95

68.5

1.84

HSK100A x MCK1 - 100

HSK100A x MCK2 - 75

2.09

HSK100A x MCK2 - 115

HSK100A x MCK3 - 60

HSK100A x MCK3 - 125

2.47

HSK100A x MCK4 - 70

HSK100A x MCK4 - 120

HSK100A x MCK5 - 70

HSK100A x MCK5 - 110

3.17

HSK100A x MCK6 - 75

3.02

HSK100A x MCK6 - 100

A173 H SK/SO M 螺 纹锁固式刀杆

HSK/SOM SCREWED END MILL HOLDER(FOR TPYE A)

HSK50A × SOM6-60

HSK50A × SOM8-60

HSK50A × SOM10-60

HSK63A × SOM6-60

HSK63A × SOM8-60

0.77

HSK63A × SOM10-60

0.79

HSK63A × SOM12-70

HSK63A × SOM16-80

H SK/MTA 斜柄鑽头套筒

HSK/MTA MORSE TAPER ADAPTER(FOR TYPE A)

DIN 228

HSK50A × SOM12-70

HSK50A × SOM16-80

- MTA= 榫舌型式本 =DIN 228-B

- MTA=TANG TYPE=DIN 228-B

HSK 50A × MTA1- 100

5.2

HSK 50A × MTA2- 120

HSK 50A × MTA3- 140

7.9

HSK 63A × MTA1- 100

HSK 63A × MTA2- 120

HSK 63A × MTA3- 140

109

HSK 63A × MTA4- 160

HSK 100A × MTA1- 110

HSK 100A × MTA2- 120

HSK 100A × MTA3- 150

HSK 100A × MTA4- 170

HSK 100A × MTA5- 200

166

A174 H SK 素材

HSK BLANK

HSK32A x Ø67-43.8

43.8

HSK63A x Ø64-240

HSK63A x Ø80-250

224

HSK63A x Ø100-150

HSK100A x Ø97-250

221

H SK 测试棒

HSK STANDARD TEST

HSK40A-TS180L

HSK50A-TS240L

282

HSK63A-TS300L

374

3.66

HSK100A-TS300L

395

7.61

HSK25E-TS175L

195

HSK32E-TS180L

2.38

HSK40E-TS180L

HSK50E-TS240L

HSK63F-TS300L

367

4.48

A175 给 水管

COOLANT SUPPLY UNIT

HSK给水管扳手

HSK COOLANT PIPE SPANNER

HSK给水管

HSK COOLANT PIPE

-HSK 刀杆中心出水使用导管

- HSK cutter bar center water leakage use drive pipe.

HSK32-CP

5.5

M10 × 1.0P

0.01

HSK40-CP

29.3

M12 × 1.0P

HSK50-CP

9.5

M16 × 1.0P

HSK63-CP

36.3

M18 × 1.0P

HSK100-CP

KEY FOR COOLANT SUPPLY UNIT

- HSK 给水管锁紧扳手

- In HSK cold tube locking spanner.

HSK50-CPW

HSK63-CPW

17.5

HSK100-CPW

HSK32-CPW

HSK40-CPW HSK-T

A177 参 考资料

60±15´

b4

30°

HSK-T32

HSK-T40

HSK-T50

HSK-T63

HSK-T80

HSK-T100 100 75.013

6.932

+0.03

7.932

10.54 10.425

+0.035

12.54 12.425

16.04 15.93

20.02 19.91

7. 本体规范 : DIN ISO 12164-3:20008

A178

7.Shank body standard : DIN ISO 12164-3:20008 车 刀规格介绍

DISPLAY FOR TURNING TOOLS

离隙角

锁固方式Clamp mechanism

A Back clamp system

M Multi-clamp system

C Clamp-on system

P Pin lock system

D Double clamp system

T Taper lock system

15°

JS Screw-on system

W Wedge-on system

25°

N

P

11°

JT Back clamp system

80°

55°

90°

75°

d1尺寸

d1 Dimension

07

09

065

刀具尺寸

Tool length, metric

50°

72.5°

93°

95°

M

117.5°

63°

107.5°

08

切削方向

Hand

V

06

进刀角度

Cutting edge gemoetry

刀片形状

Insert geometry

E Off-set pin system

Insert edge length

Insert

6.35 7.94 9.525 12.00 12.70

inscribed circle

S Screw-on system

HSK - T63

刀具长度

clearance

120°

85°

U

Y

82°

86°

O

135°

108°

A179 MC L N 外径车刀

MCLN EXTERNAL TURNING TOOL

刀片

HSK-T63-MCLNR-45065-12

CN..1204

HSK-T63-MCLNL-45065-12

▍配件表 Accessories

垫片

垫片螺丝

压板

压板螺丝

压板扳手

Shim

Shim Screw

Clamp

Clamp Screw

Clamp Wrench

CMS432

MLP46L-A

PL2.5

5.0

MC620

MS630

MDJ N 外径车刀

MDJN EXTERNAL TURNING TOOL

32°

HSK-T63-MDJNR-45075-15

DN..1504

HSK-T63-MDJNL-45075-15

A180

DMS442

MC622

5.0 MTJ N 外径车刀

MTJN EXTERNAL TURNING TOOL

TN..1604

1.27

HSK-T63-MTJNL-45065-16

TMS322

MLP34L-A

PL2

3.0

HSK-T63-MTJNR-45065-16

MW L N 外 径车刀

MWLN EXTERNAL TURNING TOOL

HSK-T63-MWLNR-45065-08

WN..0804

HSK-T63-MWLNL-45065-08

WMS432

A181 MV L N 外径车刀

MVLN EXTERNAL TURNING TOOL

HSK-T63-MVLNR-45075-16

VN..1604

HSK-T63-MVLNL-45075-16

VMS322

MC MN 外径车刀

MCMN EXTERNAL TURNING TOOL

HSK-T63-MCMNN-00100-12

HSK-T63-MCMNN-00140-12

172

A182

MS620

5.0 MDNN 外径车刀

MDNN EXTERNAL TURNING TOOL

HSK-T63-MDNNN-00100-15

HSK-T63-MDNNN-00140-15

MS625

MTE N 外径车刀

MTEN EXTERNAL TURNING TOOL

HSK-T63-MTENN-00100-16

HSK-T63-MTENN-00140-16

A183 MW MN 外 径车刀

MWMN EXTERNAL TURNING TOOL

MV V N 外 径车刀

MVVN EXTERNAL TURNING TOOL

HSK-T63-MWMNN-00100-08

HSK-T63-MWMNN-00140-08

HSK-T63-MVVNN-00100-16

HSK-T63-MVVNN-00140-16

A184

5.0 S LT 侧 固式刀柄

SIDE LOCK HOLDER FOR INTERNAL TURNING BAR

2.52

3.34

HSK-T63xSLT8-70

HSK-T63xSLT10-80

HSK-T63xSLT12-90

HSK-T63xSLT16-100

HSK-T63xSLT20-120

HSK-T63xSLT25-140

HSK-T63xSLT32-160

▍刀具中心出水螺丝

Screw For Coolant Outlet From Tool

Fig. (KGS)

B06-01M4x0.7P-503

SLT8

M4x0.7P

B06-01M5x0.5P-503

SLT10

M5x0.8P

SLT12

B06-01M6x1.0P-603

SLT16

SLT20

B06-01M8x1.25P-603

SLT25

SLT32

C-EBSS6-8

Applicable Spec.

Screw For Coolant Outlet From Tool Holder

A185 S LD 侧固式鑽头用刀柄

SIDE LOCK HOLDER FOR HIGH SPEED DRILL

HSK-T63xSLD12-70

HSK-T63xSLD16-75

HSK-T63xSLD20-75

104

HSK-T63xSLD25-85

HSK-T63xSLD32-90

1.74

HSK-T63xSLD40-100

S V 外 径车刀架

EXTERNAL TURNING TOOL HOLDERS

h

h1

HSK-T63xSLD8-65

HSK-T63xSLD10-70

HSK-T63xSV20R-105

HSK-T63xSV20L-105

A186 S B 外径车刀架

HSK-T63xSB25R-105

S F 外 径车刀架

HSK-T63xSF25-90

HSK-T63xSF25-120

3.99

S N 外径车刀架

HSK-T63xSN25R-115

HSK-T63xSN25L-115

A187 VDI

10889

0.4 +0.1

Z

f

Ø3

r

R0.3

4±0.01

g

0.5 l7

60°0'±0°3'

h2

h3

8 -10

= Rz 2.5

● 德规排齿规范标准 (DIN ISO 10889) 具有结构先进、製造精度高、使用方便、互换功能性强等优点。

● DIN ISO 10889 德规排齿规范标准,柄径从 VDI 16、VDI 20、VDI 30、VDI 40、VDI 50、VDI 60、VDI 80 .... 可依照需求选

择各式功能刀座,如:外径刀座、孔内刀座、快速鑽头刀座、鑽夹头刀座、切断刀座等。

● DIN ISO 10889 Tool Holders have features as the followings:

Advanced structure, high manufacturing precision, easy operation and strong exchangeability function, etc.

● DIN ISO 10889 Tool Holders have such tapers as VDI16, VDI20, VDI30, VDI40, VDI50, VDI60, VDI80, etc. It’s available for customers to

choose suitable types according to their requests, such as TURNING TOOL HOLDER, BORING BAR HOLDER, HIGH SPEED DRILL TOOL

HOLDER, DRILL CHUCK TOOL HOLDER, CUTTING TOOL HOLDER, etc.

±0.3

H6

l7

1.7

-1

3.5

15 x 15

2.4

21.7

0.8

18.77 x 1.78

24.1

23.52 x 1.78

29.7

28.3 x 1.78

38.7

3.7

2.8

1.2

37.77 x 2.62

r1

r2

O-Ring

±0.02

35.7

47.29 x 2.62

58.7

4.3

56.74 x 3.53

158

78.7

59.7

75.79 x 3.53

A189 参 考资料

主轴左旋

Spindle rotates on the left side:

主轴右旋

Spindle rotates on the right side:

Form B3

Form B1

Form B4

Form C1

Form C2

A190

Form B2

Form C3

Form C4 VDI

BMT

- 研磨级齿轮-高精度、低噪音 、低温升

- 品质保证,保固一年

- 提供客製化服务

- Grinding gears - high precision, low noise,

low temperature rise.

- Quality assurance, one year warranty.

- Provide customized service.

传动方式

-DIN1809

-DIN5480

-DIN5482

-TOME

Driven

VDI刀座系统

BMT动力刀座系统

VDI动力刀座系统

Tool Holder 外 径刀座

TURNING TOOL HOLDER

DIN ISO 10889-3

h6

h3 h4

h5

- 径向 - 右撇

- 短刀架

- 附出水孔

- Radiall-right handed.

-Short tool holder.

-With coolant hole.

尺寸 Size

d1 x h2 x l2

h4

30 x 20 x 40

30 x 20 x 60

2.02

150.B1.40.25.44

40 x 25 x 44

2.36

150.B1.50.32.55

50 x 32 x 55

h4 15°

150.B1.30.20.40

150.B1.30.20.60

- 径向 - 左撇

- Radiall-left handed.

-With coolant hole

150.B2.30.20.40

150.B2.30.20.60

150.B2.40.25.44

150.B2.50.32.55

A192 外 径刀座

h9

h4 h3

- 刀片向下

- Radial-right handed.

- Short tool holder.

- Turning insert downwards.

- With coolant hole.

d1x h1 x l2

h7

150.B3.30.20.40

150.B3.30.20.60

150.B3.40.25.44

150.B3.50.32.55

h3 h4 15°

- Radial-left handed.

d1 x h1 x l2

150.B4.30.20.40

150.B4.30.20.60

150.B4.40.25.44

150.B4.50.32.55

A193 端 面刀座

FACE TURNING TOOL HOLDER

DIN ISO 10889-4

- 轴向 - 右撇

- Axiall-right handed.

d1 x h1

150.C1.30.20

30 x 20

150.C1.40.25

40 x 25

3.38

150.C1.50.32

50 x 32

b5

b6

- 轴向 - 左撇

- Axiall-left handed.

150.C2.30.20

150.C2.40.25

47.5

150.C2.50.32

30.5

A194 端 面刀座

150.C3.30.20

150.C3.40.25

3.54

150.C3.50.32

150.C4.30.20

150.C4.40.25

150.C4.50.32

A195 内 孔搪刀座

BORING BAR HOLDER

DIN ISO 10889-5

- 内径公差:H5

- 中心出水

- Tolerance of internal hole: H5.

- With center coolant.

Size

d1 x d2

150.E1.30.20

150.E1.30.25

150.E1.30.32

150.E1.30.40

150.E1.40.18

150.E1.40.20

150.E1.40.25

150.E1.40.32

150.E1.40.40

150.E1.40.50

150.E1.50.20

150.E1.50.25

150.E1.50.32

150.E1.50.40

150.E1.50.50

30 x 25

30 x 32

30 x 40

40 x 18

40 x 20

40 x 32

40 x 40

40 x 50

50 x 20

50 x 25

50 x 40

50 x 50

M10x1

M12x1

M16x1

2.58

V DI 车 刀架

VDI DRILLING CHUCK

TYPE SPU

A196

150.30.669.08

150.30.669.13

150.30.669.16

150.40.669.08

150.40.669.13

150.40.669.16

150.50.669.13

150.50.669.16

30 x SPU8

30 x SPU13

30 x SPU16

40 x SPU8

40 x SPU13

40 x SPU16

50 x SPU13

50 x SPU16

0.5-8

1-13

3-16

2.32

3.12

- 内 孔搪刀座

DIN ISO 10889-6

150.E2.30.08

30 x 8

150.E2.30.10

30 x 10

150.E2.30.12

30 x 12

150.E2.30.14

30 x 14

1.82

150.E2.30.16

30 x 16

150.E2.30.18

30 x 18

150.E2.30.20

150.E2.30.25

150.E2.30.32

150.E2.40.10

40 x 10

150.E2.40.12

40 x 12

2.44

150.E2.40.14

40 x 14

150.E2.40.16

40 x 16

150.E2.40.18

150.E2.40.20

150.E2.40.25

150.E2.40.32

150.E2.40.40

150.E2.40.50

150.E2.50.12

50 x 12

150.E2.50.16

50 x 16

150.E2.50.20

150.E2.50.25

150.E2.50.32

150.E2.50.40

150.E2.50.50

A197 E OC 套 筒式刀座

EOC COLLET CHUCK HOLDER FOR EOC COLLETS

150.E3.30.25

30 x EOC25

16.5

150.E3.40.25

40 x EOC25

150.E3.40.32

40 x EOC32

150.E3.50.25

50 x EOC25

150.E3.50.32

50 x EOC32

E R 套 筒式刀座

DIN ISO 15488

ER COLLET CHUCK HOLDER FOR ER COLLETS

- 搭配 DIN-15488 系列弹性筒夹,可夹持各直柄刀具

- 使用包固得螺帽提高刚性

- 无风阻螺帽搭配使用,夹持力大、稳定性与精度提高

A198

- It can match with ER Spring Collet (DIN-15488 standard) and can

clamp all kinds of straight shank tools.

- Rigidity can be raised by using ER Power Good Clamping Nut.

- Matching with non wind resistance nut can raise clamping power,

stability and precision.

150.E4.30.25

30 x ER25

150.E4.30.32

30 x ER32

150.E4.30.40

30 x ER40

150.E4.40.25

40 x ER25

150.E4.40.32

40 x ER32

150.E4.40.40

40 x ER40

150.E4.50.40

50 x ER40

- V DI 素 材

VDI TOOL HOLDER BLANK

DIN ISO 10889-2

b

d1 x l1

150.A1.30.85

30 x 85

150.A1.40.100

40 x 100

V DI 素 材

15 max.

d 1 x l2

150.A2.30.100

30 x 100

150.A2.30.240

30 x 240

150.A2.40.120

40 x 120

150.A2.40.200

40 x 200

150.A2.40.320

40 x 320

320

V DI 主 轴检测棒

VDI SPINDLE TEST BAR

TYPE BC

d1 x d2 x l1

150.30.40.230

30 x 40 x 230

150.40.40.200

40 x 40 x 200

150.50.40.200

50 x 40 x 200

A199 PSC

26623-1

+0.1

-0.05

PSC32

PSC40

34.9

PSC50

PSC63

70.7

PSC80

PSC80X

l8

l11

Min

M16x1.5P

M12x1.5P

55.4

88.3

1. 锥度精度 :<AT3

1. Taper tolerance < AT3.

2. 硬度 :HRC 56°

2. Hardness>HRC 56°.

3. 渗碳深度 >0.8mm

3. Carbon depth>0.8mm.

4. 真圆度 :< 0.8μm

4. Roundness < 0.8μm.

5. 表面粗糙度 :Ra< 0.25μm

5. Surface roughness :Ra < 0.25μm.

6. The shank has pre-balance at G6.3,and can provide

7. 本体规范 :ISO 26623-1

7. Shank body standard : ISO 26623-1.

A201 P SC 编码规范

PSC CODING STANDARDS

接口型式

记号

PSC32(C3)

PSC40(C4)

PSC50(C5)

PSC63(C6)

PSC80(C8)

PSC80X(C8X)

压板锁固方式

功能

Back Clamp

螺销上压式

上压式

侧推式

Double Clamp

Off-set pin

Screw-on

压孔式

Taper lock

楔勾式

JS

JT

记号 离隙角

M C L N R

长度记号

45 065 12

7.94 9.525 12.00 12.70

记号 角度

图形

记号 图形

A202

d1 尺寸

刀具有效长

图形 P SC 特 点

PSC FEATURE

Triangular polygon

cone driver

三角锥系统

Magazine and

Spindle Socket

Through-Tool

Coolant

主轴定位槽

1:20 taper with

dual-contact

出水孔

採用1:20锥度

双面拘束的结构

4 ATC Sockets

Alignment

四等分夹持沟槽,

利于ATC精准定位

搭配等径

异径套筒时的对齐点

重複定位精度高

XYZ轴向的重複定位精度是±2μm,刀

具延伸四倍长的偏摆精度是3μm。

High Precision Coupling

The precision during repeated coupling in the XYZ

direction is ±2µm and the run-out accuracy is 3µm.

Unique Dual Contact Design

独特的双面拘束设计

连接结构是高精度的三角锥体,採用

1:20锥度双面拘束的夹紧结构,在车削

加工中,因为没有定位误差,即不惧轴

高位移,且切削扭矩呈现均匀分布,提

高扭转刚性。

增进生产效率

稳固的夹持、良好的稳定性与精度,可

以有效降低磨耗并增加刀具寿命。广泛

的应用方式配上模组化的组合模式,让

加工者得以节省时间与空间。

The coupling structure is a high precision triangular form

with a 1:20 taper for dual contact and tight clamping.

Designed without drive keys evenly distributes torque

without balance irregularities. There are no axial

discrapencies during lathe turning due to consistant

positioning.

Increase Productivity

Rigid clamping for superior stability and precision, which

produces minimal wear and a longer tool life. The universal

applications and modular interface allow manufacturers to

save time and space.

A203 PSC Modular combination

模组化示意图

PSC + IAP

PSC + CIAP

铣床

PSC + MAP

PSC + CMAP

PSC + FMA

PSC + FMB

FACE MILLING CUTTERS

COLLET

SEALED

CAP

PSC + MLD

PSC ADAPTER

PSC + SFC

PSC + ER

WRENCHES

NUTS

COLLETS

PSC + SBL

PSC + SKS

PSC + SLN

A204

PSC + PNER

BLANK PSC

ADAPTER Turning

BT + PSC ADAPTER

车床

PSC / MWLN

PSC / MTJN

PSC / MDNN

PSC / MCMN

PSC / MCLN

PSC / MDJN

PSC / MVLN

PSC / MVVN

PSC / S25R

PSC / SN20

PSC / SV20R/L

Boring

搪孔

BORING CUTTER

DAT + PSC ADAPTER

PSC + PBJ

PSC + PCK

HSK + PSC ADAPTER

PSC + SBJ

ACCESSORIES

PSC + PMB

PSC + MCK

EXTENSION

SPACER

SCK BORING HEAD

SMB BORING HEAD

A205 P SC /MC L N 外 径车刀

PSC/MCLN EXTERNAL TURNING TOOL

PSC32-MCLNR-22045-12

PSC32-MCLNL-22045-12

PSC40-MCLNR-27050-12

PSC40-MCLNL-27050-12

PSC50-MCLNR-35060-12

28.65

PSC50-MCLNL-35060-12

PSC63-MCLNR-45065-12

PSC63-MCLNL-45065-12

P SC/MDJ N 外 径车刀

PSC/MDJN EXTERNAL TURNING TOOL

7 d2

PSC32-MDJNR-22045-15

PSC32-MDJNL-22045-15

PSC40-MDJNR-27050-15

PSC40-MDJNL-27050-15

PSC50-MDJNR-3506015

PSC50-MDJNL-35060-15

PSC63-MDJNR-45075-15

PSC63-MDJNL-45075-15

A206

5.0 P SC /MTJ N 外径车刀

PSC/MTJN EXTERNAL TURNING TOOL

PSC32-MTJNR-22045-16

PSC32-MTJNL-22045-16

PSC40-MTJNR-27050-16

PSC40-MTJNL-27050-16

PSC50-MTJNR-35060-16

PSC50-MTJNL-35060-16

PSC63-MTJNR-45065-16

PSC63-MTJNL-45065-16

P SC /MW L N 外径车刀

PSC/MWLN EXTERNAL TURNING TOOL

5 d2

PSC32-MWLNR-22045-08

PSC32-MWLNL-22045-08

PSC40-MWLNR-27050-08

PSC40-MWLNL-27050-08

PSC50-MWLNR-35060-08

PSC50-MWLNL-35060-08

PSC63-MWLNR-45065-08

PSC63-MWLNL-45065-08

A207 P SC /MV L N 外 径车刀

PSC/MVLN EXTERNAL TURNING TOOL

PSC32-MVLNR-20050-16

PSC32-MVLNL-20050-16

PSC40-MVLNR-27055-16

PSC40-MVLNL-27055-16

PSC50-MVLNR-35060-16

PSC50-MVLNL-35060-16

PSC63-MVLNR-45075-16

PSC63-MVLNL-45075-16

P SC /MC MN 外径车刀

PSC/MCMN EXTERNAL TURNING TOOL

PSC32-MCMNN-00050-12

PSC40-MCMNN-00060-12

PSC50-MCMNN-00070-12

PSC63-MCMNN-00100-12

A208

5.0 P SC /MDNN 外径车刀

PSC/MDNN EXTERNAL TURNING TOOL

PSC32-MDNNN-00050-15

PSC40-MDNNN-00060-15

PSC50-MDNNN-00070-15

PSC63-MDNNN-00100-15

P SC/MVV N 外径车刀

PSC/MVVN EXTERNAL TURNING TOOL

PSC32-MVVNN-00055-16

PSC40-MVVNN-00060-16

PSC50-MVVNN-00070-16

PSC63-MVVNN-00100-16

A209 P SC /I AP 直 角高速铣刀

PSC/IAP THROW-AWAY END MILL CUTTER

PSC32xIAP16-50-2T

AP..1003

PSC32xIAP20-50-2T

PSC32xIAP20-50-3T

PSC32xIAP25-50-2T

PSC32xIAP25-50-3T

PSC32xIAP32-50-3T

PSC40xIAP16-50-2T

PSC40xIAP20-50-2T

PSC40xIAP25-55-2T

PSC40xIAP25-55-3T

PSC40xIAP32-65-3T

PSC50xIAP20-95-3T

PSC50xIAP25-95-3T

PSC50xIAP32-65-3T

PSC50xIAP40-80-3T

AP..1604

PSC50xIAP50-60-5T

PSC50xIAP63-60-5T

PSC63xIAP20-110-3T

PSC63xIAP20-165-2T

203

PSC63xIAP25-110-3T

PSC63xIAP32-80-3T

PSC63xIAP32-110-3T

PSC63xIAP40-80-4T

PSC63xIAP40-80-5T

PSC63xIAP40-100-3T

PSC63xIAP50-80-4T

PSC63xIAP63-60-5T

PSC63xIAP66-60-5T

PSC63xIAP66-80-5T

PSC63xIAP80-60-6T

A210

M2.5-6.45-3.7-60

T8

M4-10-5.7-60

T15

Insert P SC /CI A P 直角高速铣刀

PSC/CIAP THROW-AWAY END MILL

PSC32xCIAP16-50-2T

PSC32xCIAP20-50-2T

PSC32xCIAP20-50-3T

PSC32xCIAP25-50-2T

PSC32xCIAP25-50-3T

PSC32xCIAP32-50-3T

PSC40xCIAP16-50-2T

PSC40xCIAP20-50-2T

PSC40xCIAP25-55-2T

PSC40xCIAP25-55-3T

PSC40xCIAP32-65-3T

PSC50xCIAP20-95-3T

PSC50xCIAP25-95-3T

PSC50xCIAP32-65-3T

PSC50xCIAP40-80-3T

PSC50xCIAP50-60-5T

PSC50xCIAP63-60-5T

PSC63xCIAP20-110-3T

PSC63xCIAP20-165-2T

PSC63xCIAP25-110-3T

PSC63xCIAP32-80-3T

PSC63xCIAP32-110-3T

PSC63xCIAP40-80-4T

PSC63xCIAP40-80-5T

PSC63xCIAP40-100-3T

PSC63xCIAP50-80-4T

PSC63xCIAP63-60-5T

PSC63xCIAP66-60-5T

PSC63xCIAP66-80-5T

PSC63xCIAP80-60-6T

A211 P SC /MAP 直 角高速铣刀

PSC/MAP THROW-AWAY END MILL CUTTER

PSC32xMAP16-50-2T

AP..1135

PSC32xMAP20-50-2T

PSC32xMAP20-50-3T

PSC32xMAP25-50-2T

PSC32xMAP25-50-3T

PSC32xMAP32-50-2T

PSC40xMAP16-50-2T

PSC40xMAP20-50-2T

PSC40xMAP25-55-2T

PSC40xMAP25-55-3T

PSC40xMAP32-65-2T

PSC50xMAP20-95-3T

PSC50xMAP25-95-3T

PSC50xMAP32-65-2T

PSC50xMAP50-60-5T

PSC50xMAP63-60-5T

PSC63xMAP20-110-3T

PSC63xMAP20-165-2T

PSC63xMAP25-110-3T

PSC63xMAP32-80-3T

PSC63xMAP32-110-3T

PSC63xMAP40-80-4T

PSC63xMAP40-80-5T

PSC63xMAP40-100-3T

PSC63xMAP50-80-4T

PSC63xMAP63-60-5T

PSC63xMAP66-60-5T

PSC63xMAP66-80-5T

PSC63xMAP80-60-6T

M2.5-6.0-3.5-60

A212 P SC /CMA P 直角高速铣刀

PSC/CMAP THROW-AWAY END MILL

PSC32xCMAP16-50-2T

PSC32xCMAP20-50-2T

PSC32xCMAP20-50-3T

PSC32xCMAP25-50-2T

PSC32xCMAP25-50-3T

PSC32xCMAP32-50-2T

PSC40xCMAP16-50-2T

PSC40xCMAP20-50-2T

PSC40xCMAP32-65-2T

PSC50xCMAP20-95-3T

PSC50xCMAP25-95-3T

PSC50xCMAP32-65-2T

PSC50xCMAP50-60-5T

PSC50xCMAP63-60-5T

PSC63xCMAP20-110-3T

PSC63xCMAP20-165-2T

PSC63xCMAP25-110-3T

PSC63xCMAP32-80-3T

PSC63xCMAP32-110-3T

PSC63xCMAP40-80-4T

PSC63xCMAP40-80-5T

PSC63xCMAP40-100-3T

PSC63xCMAP50-80-4T

PSC63xCMAP63-60-5T

PSC63xCMAP66-60-5T

PSC63xCMAP66-80-5T

PSC63xCMAP80-60-6T

PSC40xCMAP25-55-2T

PSC40xCMAP25-55-3T

A213 P SC /SKS 高速机专用夹头 ( 无风阻 )

PSC/SKS COLLET CHUCK (NO WIND RESISTANCE)

标准动平衡 G2.5 25000rpm

PSC32xSKS6-45-HS

M8 x 1.25P

PSC32xSKS10-45-HS

PSC40xSKS6-50-HS

PSC40xSKS10-50-HS

PSC40xSKS13-50-HS

PSC40xSKS16-50-HS

31.3

M18 x 1.5P

PSC50xSKS6-60-HS

PSC50xSKS10-60-HS

PSC50xSKS13-60-HS

PSC50xSKS16-60-HS

PSC63xSKS6-90-HS

PSC63xSKS10-90-HS

PSC63xSKS13-90-HS

PSC63xSKS16-100-HS

PSC63xSKS20-100-HS

M22 x 1.5P

锁刀座 Lock Device

A214 P SC /SBL 后拉式立铣刀夹头

PSC/SBL SLIM-FIT COLLET CHUCK

- Standard balance of G2.5 at 25000 rpm.

PSC32xSBL6-75

M6 x 1.0P

PSC32xSBL12-90

31.2

M10 x 1.5P

Ø3~Ø12

PSC40xSBL6-75

PSC40xSBL12-90

31.9

PSC40xSBL20-105

PSC50xSBL6-80

18.8

PSC50xSBL12-105

PSC50xSBL20-115

43.2

PSC63xSBL6-80

PSC63xSBL12-100

PSC63xSBL20-120

Features

A215 P SC /SFC 热膨胀刀杆

PSC/SFC SHRINK FIT CHUCK

d1 d2

PSC40xSFC6-75

M5 x 0.8P

PSC40xSFC8-75

PSC40xSFC10-75

PSC40xSFC12-75

PSC40xSFC14-80

PSC40xSFC16-80

PSC40xSFC18-80

PSC40xSFC20-85

PSC50xSFC6-75

PSC50xSFC8-75

PSC50xSFC10-75

PSC50xSFC12-75

PSC50xSFC14-80

PSC50xSFC16-80

PSC50xSFC18-80

PSC50xSFC20-85

PSC50xSFC25-90

M20 x 2.0P

PSC63xSFC6-80

PSC63xSFC8-80

PSC63xSFC10-80

PSC63xSFC12-80

PSC63xSFC14-85

PSC63xSFC16-85

PSC63xSFC18-85

PSC63xSFC20-85

PSC63xSFC25-90

PSC63xSFC32-95

A216 P SC /E R 立 铣刀夹头

PSC/ER COLLET CHUCK

PSC32xER16-45

PSC32xER20-45

Ø2~Ø13

PSC40xER16-70

PSC40xER20-52

PSC40xER25-52

Ø2~Ø16

PSC40xER32-54

PSC50xER16-100

PSC50xER20-55

PSC50xER20-100

PSC50xER25-55

PSC50xER32-57

PSC50xER32-100

PSC63xER16-100

PSC63xER20-60

PSC63xER25-60

PSC63xER25-100

PSC63xER32-70

PSC63xER32-100

PSC63xER40-65

A217 P SC /ML D 直 式筒夹铣床夹头

PSC/MLD MULTI-LOCK MILLING CHUCK

l

- 内孔特殊沟槽设计,防止所夹持刀具脱刀滑落,可以

割断附著油膜,不会有脱刀现象产生,提高了使用的安

全性

- 刀杆本体厚,可产生充分的夹持力。採用滚针轴承原

理设计,滚动磨擦及脱落减到小,装置操作省力便捷

- 螺帽与刀杆端面锁固后,紧贴牢靠,提高刚性并彻底

的防尘

-MLD20、MLD-3/4、MLK20 扳手共用

-MLD32、MLD-1-1/4、MLK32 扳手共用

- The body of the tool holder is thick, so it has good clamping power.

It adopts the needle bearing design to prevent the slipping. The

operation is convenient and easy.

- After locking the cutting tool (The tolerance of the cuttingtool must

be less than h6), it is more contacted with theflange while locking

the clamping nut and tool holder. It can prevent the bearing cage

from deformation easily. Also, rigidity and dust-proof function is

improved.

- Run-out: Within 0.001~0.005mm.Concentricity: 0.02mm.

PSC50xMLD20-75

PSC50xMLD32-90

PSC63xMLD20-75

PSC63xMLD32-85

※ 英制规格,接单生产 INCH size made to order.

A218 P SC /FMA 平面铣刀柄

PSC/FMA FACE MILL ARBOR

d2 D

PSC50xFMA25.4-40

17.449

31.496

55.626

4.775

PSC63xFMA25.4-50

PSC63xFMA31.75-50

40.995

PSC63xFMA38.1-50

96.774

8.864

P SC /FMB 平 面铣刀 柄

PSC/FMB FACE MILL ARBOR

PSC32xFMB16-30

PSC40xFMB16-32

PSC40xFMB16-55

PSC40xFMB22-25

PSC40xFMB22-55

PSC50xFMB16-35

PSC50xFMB16-70

PSC50xFMB22-25

PSC50xFMB22-70

PSC50xFMB27-25

PSC50xFMB32-40

PSC63xFMB16-40

PSC63xFMB22-40

PSC63xFMB27-30

PSC63xFMB32-45

PSC63xFMB40-45

A219 P SC /SL N 侧 固式立铣刀柄

PSC/SLN SIDE-LOCK END MILL HOLDER

PSC32xSLN6-45

27.5

PSC32xSLN8-45

PSC32xSLN10-50

PSC32xSLN12-55

PSC40xSLN6-50

PSC40xSLN8-50

PSC40xSLN10-50

PSC40xSLN12-55

PSC40xSLN14-50

PSC40xSLN16-55

M14

PSC50xSLN6-50

PSC50xSLN8-50

PSC50xSLN10-55

PSC50xSLN12 -60

PSC50xSLN14-60

PSC50xSLN16-60

PSC50xSLN18-60

PSC50xSLN20-60

PSC50xSLN25-80

M18

PSC63xSLN6-55

PSC63xSLN8-55

PSC63xSLN10-60

PSC63xSLN12-60

PSC63xSLN14-60

PSC63xSLN16-65

PSC63xSLN18-65

PSC63xSLN20-65

37.5

PSC63xSLN25-80

PSC63xSLN32-90

PSC63xSLN40-100

A220 P SC /MC K 搪孔刀柄

PSC/MCK BORING HEAD SHANK

PSC40xMCK2-45

19.5

M5X0.5P

PSC40xMCK3-40

M6X0.75P

PSC40xMCK4-33

M8X0.75P

PSC50xMCK2-85

60.5

PSC50xMCK3-55

PSC50xMCK3-80

PSC50xMCK4-48

PSC50xMCK4-73

PSC50xMCK5-50

M10X1.0P

PSC50xMCK5-83

PSC50xMCK6-50

M12X1.0P

PSC63xMCK2-90

PSC63xMCK3-65

PSC63xMCK3-100

PSC63xMCK4-58

PSC63xMCK4-93

PSC63xMCK5-48

PSC63xMCK5-83

PSC63xMCK6-59

PSC63xMCK6-94

A221 S BT/PSC 套筒

SBT/PSC ADAPTER

PSC NO.

SBT40xPSC32-30

T10-200

SBT40xPSC40-30

T12-200

SBT40xPSC50-30

SBT40xPSC63-75

SBT50xPSC32-40

SBT50xPSC40-40

SBT50xPSC50-40

SBT50xPSC63-100

SBT50xPSC63-150

5.75

SBT50xPSC63-200

6.81

SBT50xPSC63-250

7.88

SBT50xPSC63-300

8.73

D A T/PSC 套 筒

DAT/PSC ADAPTER

DAT40xPSC32-30

DAT40xPSC40-40

DAT40xPSC50-50

DAT40xPSC63-90

DAT50xPSC32-30

DAT50xPSC40-30

DAT50xPSC50-30

DAT50xPSC63-30

DAT50xPSC63-100

DAT50xPSC63-150

DAT50xPSC63-200

DAT50xPSC63-250

DAT50xPSC63-300

A222 H SK/PSC 套筒

HSK/PSC ADAPTER

HSK63AxPSC32-75

T6-200

HSK63AxPSC40-80

HSK63AxPSC50-90

HSK100AxPSC32-80

HSK100AxPSC40-90

HSK100AxPSC50-100

HSK100AxPSC63-110

3.41

HSK100AxPSC63-150

HSK100AxPSC63-200

5.14

HSK100AxPSC63-250

HSK100AxPSC63-300

7.07

P SC 异 径套筒

PSC EXTENSION ADAPTER (FOR DIFFERENT DIAMETER)

PSC40xPSC32-55

PSC40xPSC32-70

PSC50xPSC32-60

PSC50xPSC40-65

PSC50xPSC40-85

PSC63xPSC32-70

PSC63xPSC40-80

PSC63xPSC50-80

PSC63xPSC50-110

A223 P SC 等 径套筒

PSC EXTENSION ADAPTER (FOR SAME DIAMETER)

PSC32xPSC32-60

PSC32xPSC32-80

PSC40xPSC40-60

PSC40xPSC40-80

PSC50xPSC50-80

PSC50xPSC50-100

PSC63xPSC63-80

PSC63xPSC63-100

PSC63xPSC63-140

178

PSC63xPSC63-200

238

PSC63xPSC63-300

338

P SC /PCK 可 调式双刃粗搪孔头 ( 一体式 )

PSC/PCK ADJUSTABLE DOUBLE-EDGED BORING HEAD

ØD

øD 搪孔范围 Boring Range

PSC32 x PCK3950-80

CC..09T3

0.49

PSC40 x PCK4965-82

CC..1204

PSC50 x PCK6382-92

PSC63 x PCK80102-140

A224

M5-11-7.5-60

T20

Insert P SC /PMB 超微米精搪头 ( 一体式 )

PSC/PMB SUPER MICRON EXCHANGEABLE FINISH BORING HEAD

øD 搪孔范围 Boring Range( 正搪 )

Min. Max.

PSC32xPMB32-85

PSC40xPMB41-102

PSC63xPMB68-140

104 85

126 102

142 112

178 140

91.5 65

117.5 94

SIB32-1/SIC32-1

SIB32-2/SIC32-2

SIB32-3/SIC32-3

SIB41-1/SIC41-1

SIB41-2/SIC41-2

SIB41-3/SIC41-3

SIB53-1/SIC53-1

34 25.5 SIB53-2/SIC53-2

SIB53-3/SIC53-3

SIB68-1/SIC68-1

126 90.8 45.2 32.5 SIB68-2/SIC68-2

SIB68-3/SIC68-3

TB..0601

TP..0802

M2-5.0-2.7-60

TP..0902

TC..1102

PSC50xPMB53-112

øD 搪孔范围 Boring Range( 背搪 )

不含 SIB/SIC 刀片座,刀片座需另外购买 Not including SIB/SIC insert seat, insert seat need purchase separately.

P SC /PBJ 高精密搪孔头 ( 一体式 )

PSC/PBJ BORING HEAD

PSC40xPBJ10-48.5

PSC50xPBJ12-56

PSC63xPBJ16-67

A225 P SC 主轴测试棒

PSC TEST BAR

0.002

199

0.41

PSC32x20-180

PSC40x32-180

204

PSC50x32-180

PSC50x32-245

275

245

PSC50x40-280

310

280

PSC63x40-182

220

182

1.93

PSC63x40-232

270

232

PSC63x40-352

390

P SC 素材

PSC BLANK

PSC32xØ60-90

PSC40xØ40-120

PSC40xØ80-120

PSC50xØ50-150

PSC50xØ95-150

PSC63xØ63-180

PSC63xØ120-180

PSC32xØ32-90

A226 SAF

Runout Adjustable Holder Systems RUNOUT

- 藉由调整径向螺丝及轴向螺丝,刀缘

偏摆精度可调整至5µm内

- Drive axial and radial set screws for precision

adjustment and the runout accuracy of the tool

edge can be adjusted within 5µm.

ADJUSTABLE BT/SAF 可 调式刀杆

BT/SAF RUNOUT ADJUSTABLE HOLDER

法兰盘形式 Flange Adapter : SFC

- 藉由调整径向螺丝及轴向螺丝,刀缘偏摆精度可调整至

5µm 内

- Drive axial and radial set screws for precision adjustment and the runout

accuracy of the tool edge can be adjusted within 5µm.

组合 Combination

本体 Body

法兰盘 Flange Adapter

BT30xSAFC25

SFC6-70

SFC8-70

BT30xSAFC10-110

SFC10-70

BT30xSAFC12-110

SFC12-70

BT30xSAFC16-115

SFC16-75

BT40xSAFC6-120

BT40xSAFC25

BT40xSAFC8-120

BT40xSAFC10-120

BT40xSAFC12-120

BT40xSAFC16-125

BT40xSAFC20-130

BT40xSAFC40

SFC20-80

BT40xSAFC25-150

SFC25-100

BT40xSAFC32-150

SFC32-100

3.06

BT50xSAFC6-130

BT50xSAFC25

BT50xSAFC8-130

BT50xSAFC10-130

BT50xSAFC12-130

BT50xSAFC16-135

BT50xSAFC20-140

BT50xSAFC40

5.26

BT50xSAFC25-160

5.79

BT50xSAFC32-160

5.65

BT30xSAFC6-110

BT30xSAFC8-110

A229 BT/SAF 可 调式刀杆

法兰盘形式 Flange Adapter : PNER

PNER16-50

PNER20-50

PNER16-100

PNER20-100

BT40xSAFP25-100

28.9

PNER25-50

BT40xSAFP25-150

78.9

PNER25-100

2.83

BT40xSAFP32-110

PNER32-60

2.56

BT40xSAFP32-150

PNER32-100

3.11

BT50xSAFP16-110

BT50xSAFP16-160

BT50xSAFP20-110

BT50xSAFP20-160

BT50xSAFP25-110

BT50xSAFP25-160

BT50xSAFP32-120

5.15

BT50xSAFP32-160

BT30xSAFP16-90

BT30xSAFP20-90

BT40xSAFP16-100

BT40xSAFP16-150

BT40xSAFP20-100

BT40xSAFP20-150

组合 Combination S BT/SAF 可调式刀杆

SBT/SAF RUNOUT ADJUSTABLE HOLDER

SBT30xSAFC10-110

SBT30xSAFC12-110

SBT30xSAFC16-115

SBT40xSAFC6-120

SBT40xSAFC8-120

SBT40xSAFC10-120

SBT40xSAFC12-120

SBT40xSAFC16-125

SBT40xSAFC20-130

SBT40xSAFC25-150

SBT40xSAFC32-150

3.07

SBT50xSAFC6-130

SBT50xSAFC8-130

SBT50xSAFC10-130

SBT50xSAFC12-130

SBT50xSAFC16-135

SBT50xSAFC20-140

SBT50xSAFC25-160

SBT50xSAFC32-160

5.69

SBT30xSAFC6-110

SBT30xSAFC8-110

A231 S BT/SAF 可调式刀杆

2.84

4.29

5.46

5.19

组合 Combination H S K/SA F 可调式刀杆

HSK/SAF RUNOUT ADJUSTABLE HOLDER

HSK40AxSAFC6-130

HSK40AxSAF25

HSK40AxSAFC8-130

HSK40AxSAFC10-130

HSK40AxSAFC12-130

HSK40AxSAFC16-135

HSK50AxSAFC6-130

HSK50AxSAF25

HSK50AxSAFC12-130

HSK50AxSAFC16-135

HSK63AxSAFC6-130

HSK63AxSAF25

HSK63AxSAFC8-130

1.67

HSK63AxSAFC10-130

HSK63AxSAFC12-130

HSK63AxSAFC16-135

HSK63AxSAFC20-140

HSK63AxSAF40

HSK63AxSAFC25-160

3.08

HSK63AxSAFC32-160

2.94

HSK80AxSAFC6-120

HSK80AxSAF25

HSK80AxSAFC8-120

HSK80AxSAFC10-120

HSK80AxSAFC12-120

HSK80AxSAFC16-125

HSK80AxSAFC20-140

HSK80AxSAF40

3.14

HSK80AxSAFC25-160

HSK80AxSAFC32-160

HSK100AxSAFC6-125

HSK100AxSAF25

HSK100AxSAFC8-125

HSK100AxSAFC10-125

2.97

HSK100AxSAFC12-125

HSK100AxSAFC16-130

HSK100AxSAFC20-135

HSK100AxSAF40

HSK100AxSAFC25-155

HSK100AxSAFC32-155

4.31

HSK50AxSAFC8-130

HSK50AxSAFC10-130

A233 H S K/SA F 可调式刀杆

HSK40AxSAFP16-110

PNER16

HSK40AxSAFP16-160

HSK40AxSAFP20-110

PNER20

HSK40AxSAFP20-160

HSK50AxSAFP16-110

PNER25

HSK50AxSAFP16-160

HSK50AxSAFP20-110

PNER32

HSK50AxSAFP20-160

1.51

HSK63AxSAFP16-110

HSK63AxSAFP16-160

HSK63AxSAFP20-110

HSK63AxSAFP20-160

HSK63AxSAFP25-110

2.29

HSK63AxSAFP25-160

HSK63AxSAFP32-120

HSK63AxSAFP32-160

2.99

HSK80AxSAFP16-100

HSK80AxSAFP16-150

2.13

HSK80AxSAFP20-100

HSK80AxSAFP20-150

2.16

HSK80AxSAFP25-110

2.88

HSK80AxSAFP25-160

HSK80AxSAFP32-120

3.03

HSK80AxSAFP32-160

HSK100AxSAFP16-105

HSK100AxSAFP16-155

HSK100AxSAFP20-105

HSK100AxSAFP20-155

HSK100AxSAFP25-105

HSK100AxSAFP25-155

4.08

HSK100AxSAFP32-115

3.81

HSK100AxSAFP32-155

A234 P SC/SAF 可 调式刀杆

PSC/SAF RUNOUT ADJUSTABLE HOLDER

PSC40xSAFC6-125

PSC40xSAF25

PSC40xSAFC8-125

PSC40xSAFC10-125

PSC40xSAFC12-125

PSC40xSAFC16-130

PSC50xSAFC6-130

PSC50xSAF25

PSC50xSAFC8-130

PSC50xSAFC10-130

PSC50xSAFC12-130

PSC50xSAFC16-135

PSC63xSAFC6-130

PSC63xSAF25

PSC63xSAFC8-130

PSC63xSAFC10-130

PSC63xSAFC12-130

PSC63xSAFC16-135

PSC63xSAFC20-140

PSC63xSAF40

3.01

PSC63xSAFC25-160

PSC63xSAFC32-160

PSC80xSAFC6-120

PSC80xSAF25

PSC80xSAFC8-120

PSC80xSAFC10-120

2.59

PSC80xSAFC12-120

PSC80xSAFC16-125

2.62

PSC80xSAFC20-140

PSC80xSAF40

PSC80xSAFC25-160

PSC80xSAFC32-160

A235 P SC/SAF 可 调式刀杆

PSC40xSAFP16-105

PSC40xSAFP16-155

PSC40xSAFP20-105

PSC40xSAFP20-155

PSC50xSAFP16-110

PSC50xSAFP16-160

PSC50xSAFP20-110

1.53

PSC50xSAFP20-160

PSC63xSAFP16-110

PSC63xSAFP16-160

PSC63xSAFP20-110

PSC63xSAFP20-160

2.14

PSC63xSAFP25-110

PSC63xSAFP25-160

PSC63xSAFP32-120

PSC63xSAFP32-160

PSC80xSAFP16-100

PSC80xSAFP16-150

PSC80xSAFP20-100

PSC80xSAFP20-150

PSC80xSAFP25-110

PSC80xSAFP25-160

3.97

PSC80xSAFP32-120

PSC80xSAFP32-160

A236 S A F 可 调式刀杆本体

SAF RUNOUT ADJUSTABLE HOLDER BODY

SAF NO.

BT30xSAF25

BT40xSAF25

BT40xSAF40

BT50xSAF25

BT50xSAF40

SBT30xSAF25

SBT40xSAF25

SBT40xSAF40

SBT50xSAF25

2.73

SBT50xSAF40

A237 S A F 可 调式刀杆法兰盘 -SFC

SHRINK FIT CHUCK FLANGE FOR SAF

S AF 可调式刀杆法兰盘 -PN ER

PNER COLLET CHUCK FLANGE FOR SAF

0.43

28.94

40.94

80.94

1.63

A238 TAPPING

Holder Systems S T H -C X 同步补偿刚性攻牙器

STH-CX SYNCHRO TAPPING HOLDER

有效消除背隙与过大扭力

提升攻牙质量

延长丝锥寿命

无中心出水

- Effectively eliminate backlash and excessive torque.

- Tapping enhance the quality.

- Extend tap life.

- Without coolnat hole.

M3~M17

M10~M24

M3~M12

43.4

SBT40xSTH16E-CX

SBT40xSTH20E-CX

SBT40xSTH32E-CX

SBT50xSTH16E-CX

SBT50xSTH20E-CX

SBT50xSTH32E-CX

BT30xSTH16E-CX

BT30xSTH20E-CX

BT40xSTH16E-CX

BT40xSTH20E-CX

BT40xSTH32E-CX

BT50xSTH16E-CX

伸缩长度 Length Comp

缩 (-)

Comp

伸 (+)

Tens

BT50xSTH20E-CX

BT50xSTH32E-CX

SBT30xSTH16E-CX

SBT30xSTH20E-CX

A252

A240

伸缩长度 Length Comp S TH-CX 同 步补偿刚性攻牙器 ( 加长型 )

SBT30xSTH16E-70-CX

SBT30xSTH20E-70-CX

SBT40xSTH16E-70-CX

SBT40xSTH20E-70-CX

SBT40xSTH32E-70-CX

SBT50xSTH16E-70-CX

SBT50xSTH20E-70-CX

SBT50xSTH32E-70-CX

BT30xSTH16E-70-CX

BT30xSTH20E-70-CX

BT40xSTH16E-70-CX

BT40xSTH20E-70-CX

BT40xSTH32E-70-CX

BT50xSTH16E-70-CX

BT50xSTH20E-70-CX

BT50xSTH32E-70-CX

A241 S T H-E R 替 换夹头柄

STH-ER EXCHANGE QUICK CHANGE COLLET

STH-ER16

STH-ER16-70

STH-ER20

STH-ER20-70

STH-ER32

STH-ER32-70

同步补偿刚性攻牙器

Synchro tapping holder

替换夹头柄

Quick change collet

我司

SBT-STH

它牌

Other Brand

丝攻

Tap

M3

转速

rpm(S)

1400rpm

进给量

mm/rev(f)

0.5mm/rev

材质

Material

加工件数

Cutting Qty.

A242

2000/PCS wi

n

600/PCS

刚性攻牙筒夹

Rigid tap collet

Tap BT-TPL 攻牙刀杆

Ød

BT-TPL TAPPING HOLDER

Ød 夹持范围

BT30xTPL16-80

Ø0.5~Ø10.0

BT30xTPL20-80

Ø1.0~Ø13.0

BT40xTPL16-80

BT40xTPL20-80

BT40xTPL32-100

BT50xTPL16-100

BT50xTPL20-100

BT50xTPL32-100

Ø2.0~Ø20.0

攻牙刀杆

Rigid Tap Collet

A243 BT/E TP 伸缩 E R 攻牙器

PAT.NO: M3128766

PAT.NO: M3200356

BT/ETP EXPANSION ER TAPPER

- 用伸长 6.5mm,收缩 5mm

- 可搭配刚性攻牙套筒,搭配效果大增

- Elongates6.5mm, contracts 5mm.

- Match the rigid tap, the effect greatly to increase.

丝攻柄尺寸

BT30 × ETP16A-75

M3-M10

BT30 × ETP16A-90

BT30 × ETP20A-75

M3-M17

BT30 × ETP20A-90

BT40 × ETP16A-120

BT40 × ETP16A-150

BT40 × ETP20A-100

BT40 × ETP20A-150

BT40 × ETP20M-200

BT40 × ETP32 -120

M3-M27

BT50 × ETP16A-120

BT50 × ETP16A-150

BT50 × ETP20A-100

BT50 × ETP20A-150

BT50 × ETP20M-200

BT50 × ETP32 -120

A244 快 换式伸缩 / 扭力攻牙刀杆

QUICK CHANGE TAPPING CHUCK

BT30×312-68

丝攻夹头形式

Tapper

Collet Chuck Type

M3~M14

伸缩长度

Length Comp

TCS-1B

BT40×312-73

BT40×312-135

BT40×822-94

M8~M24

TCS-2B

BT40×822-165

BT40×1638-157

M14~M36

TCS-3B

BT50×312-84

BT50×312-135

BT50×822-103

BT50×822-165

BT50×1638-142

142

BT50×1638-200

7.27

A245 直 柄伸缩 E R 攻牙器 ( CN C 车床专用 )

ER TAPPER STRAIGHT SHANK(FOR CNC LATHE)

- 使用 ER 筒夹挟持螺丝攻,配合钢性攻牙筒夹则效果倍增

- 可建议使用 HSP 螺帽,以增加夹持力

- TP 型内建浮动装置使工作重複定位可自动修正偏差

- 用于刀具不旋转的场合 ( 如 : 车床、专用机械等 )

- 内附产品使用说明书

- Use ER collet hostage taps, with rigid tapping collets the multiplier

effect.

- HSP may recommend the use of nuts, to increase the clamping

force.

- TP type built so that duplication of work positioning a floating

device can automatically correct the deviation.

- For the tool does not rotate occasions (such as: lathes, special

machinery, etc.).

- Included product manual.

▍注释 Note

- 在加工材料较硬,则 m/min 应同时变得较慢

- 在使用直柄伸缩 ER 攻牙器,请先决定车床主轴运转速度,

否则将会因速度太快或太慢而造成柄及攻牙器损坏或破碎

- S=V/P S= 主轴转速 V=m/min P=Pitch

- If the processing material is herder, the m/min should become

slower relatively.

- Before using the Straight ER Tapper, please decide spindle running

speed of Lathe Machine, otherwise it will make the Shank and

Tapping break or split because of too fast or too slow speed.

- S=V/P S=Spindle speed V=m/min P=Pitch

- 工件材质 :S45C,V=400~440

- 牙距 =1.5P

- S=V/P=440/1.5=293rpm

- Processing material:S45C,V=400~440.

- Pitch=1.5P

伸缩量 Stretch Size

elongation

shorten

8mm

TP-20

159

TP-32

174.5

94.5

10mm

TPM-320

MT3

TPM-420

MT4

TPM-432

203.5

216.5

A246 TPL 实 用型直柄伸缩攻牙器

TPL PRACTICAL STRAIGHT SHANK TAPPER

- 稳定性高

- High stability.

TPL-20

TPL-32

T P L 止缩套环

TPL RETREATING FREE RING

- 防止 TPL 攻牙器往内缩

- Prevent TPL tapper from retreating back.

TPL-20-R

TPL-32-R

TPL-20 实用型直柄伸缩攻牙器

TPL-20 Practical Straight Shank tapper

TPL-20-R 止缩套环

TPL-20-R Retreating Free Ring

TPL-32 实用型直柄伸缩攻牙器

TPL-32 Practical Straight Shank tapper

TPL-32-R 止缩套环

TPL-32-R Retreating Free Ring

A247 扭 力攻牙器

TH1 × MT 2

M3 ~ M14

TCS - 1B

TH1 × JT 6

TH2 × MT 3

M8 ~ M22

TCS - 2B

伸 缩攻牙器 ( 鑽 床专用 )

QUCIK CHANGE TAPPING CHUCK

ST20-WF12

U1/8~U7/16

P1/8~P1/4

A248

THL-140 × MT 2

THL-140 × JT 6

0.5

THL-240 × MT 3

1.7 TC S 扭 力丝攻筒夹

TCS QUICK CHANGE TAPPING COLLET

TSC-1B

L1

SQ

L2

L3

L4

※ 订购前请先确认 d1 及 SQ 尺寸 Before ordering, please make sure the size of d1 and SQ.

TCS1B-2.5-2

TCS1B-3-2.5

TCS1B-3.15-2.5

TCS1B-3.5-2.7

TCS1B-4-3.15

TCS1B-4-3.2

2.7

TCS1B-4.5-3.4

3.4

TCS1B-4.5-3.55

TCS1B-5-4

TCS1B-6-4.9

TCS1B-6.1-5

TCS1B-6.2-5

6.1

TCS1B-6.3-5

TCS1B-7-5.5

TCS1B-8-6

TCS1B-8-6.2

4.9

TCS1B-8-6.3

TCS1B-8.5-6.5

TCS1B-9-7

TCS1B-9-7.1

TCS1B-10-8

7.1

TCS1B-10.5-8

TCS1B-11-9

TCS1B-11.2-9

11.2

M1.M2

M3.5

M2

M4.5.M5

M4.5

M4.M4.5

M5.M5.5

M4.5.M5.M6

UNC5/16

M8.M7

M10.M9

UNC3/8

M11

UNC7/16

PT1/8

UNC1/2

M9

M14.M15

UNC9/16

PT1/4

21.5

ISO529

ISO529/2283

DIN371

DIN376

TCS1B-5.5-4.5

TCS1B-6-4.5

适用规范

Standard

A249 TC S 扭 力丝攻筒夹

TSC-2B

TCS2B-6-4.5

TCS2B-6-4.9

TCS2B-6.2-5

TCS2B-6.3-5

TCS2B-7-5.5

TCS2B-8-6

TCS2B-8-6.2

TCS2B-8-6.3

TCS2B-8.5-6.5

TCS2B-9-7

TCS2B-9-7.1

TCS2B-10-8

TCS2B-11-9

TCS2B-11.2-9

TCS2B-12-9

TCS2B-12.5-10

TCS2B-14-11

TCS2B-14-11.2

TCS2B-15-12

TCS2B-16-12

TCS2B-16-12.5

TCS2B-17-13

TCS2B-18-14

TCS2B-18-14.5

TCS2B-19-15

A250

UNC1/4

TCS2B-10.5-8

UNC5/8

UNC3/4

PT3/8

M18.M20

M22

UNC7/8

PT1/2

M22.M24

M24.M25

JIS TC S 扭 力丝攻筒夹

TSC-3B

TCS3B-10.5-8

TCS3B-11-9

TCS3B-11.2-9

TCS3B-12-9

TCS3B-12.5-10

TCS3B-14-11

TCS3B-17-13

TCS3B-18-14

TCS3B-18-14.5

TCS3B-19-15

TCS3B-21-17

TCS3B-22-18

TCS3B-22.4-18

TCS3B-23-17

TCS3B-24-19

TCS3B-25-19

TCS3B-25-20

TCS3B-26-21

TCS3B-28-21

TCS3B-28-22

TCS3B-20-16

TCS3B-20-15

M27.M26

UNC1

M27

M27.M30

M28

M30

M33

PT3/4

M32

UNC1-1/4

M36

M35.M34

UNC1-3/8

PT1

55.5

TCS3B-14-11.2

TCS3B-15-12

TCS3B-16-12

TCS3B-16-12.5

A251 E R 钢 性攻牙筒夹

PAT.NO: 181929

PAT.NO: 148435

PAT.NO: 693702

ER RIDID TAP COLLET

Q

- 材质 :SUJ-2

- 斜度 :8°

- 硬度 :HRC46°

- 表面粗糙度 RZ2.5 以内

- Steel:SUJ - 2

- Taper:8°

- HRC46°

- Surface Roughness:RZ 2.5

- 利用沟槽的差异,有效而稳固地夹住螺丝攻、决不打滑 ! 专

利在案

- 适合切削中心机的刚性攻牙加工,或是其他攻牙机械

- 当订 JIS、DIN、ISO 或其他尺寸,订购前请校对四角孔需核

对 SQ,而圆孔则需对 d1

- 可降低使用攻牙器的成本

ER16-TP

ER20-TP

ER25-TP

ER32-TP

ER40-TP

- Differences in the use of the trench, effectively and securely grip

the screw attack, never slipping! Patents documented.

- Suitable for machining centers rigid tapping, tapping, or other

mechanical.

- When set JIS, DIN, ISO or other sizes, please proofread before

ordering to be together right corner Kong SQ, and holes need for

d1.

- Tapping can reduce the cost of using.

d1 范围

8~10

20.7

10.5~13

M3~M22

10.5~16

27.34

17~20

31.4

0.24 E R 钢性攻牙筒夹

使用丝攻范围

Tapping range

丝攻柄径

Shank diameter of tapper

ER16-2.24TP

ISO - 529

ER16-2.5TP

DIN - 376

ER16-2.8TP

ER16-3.15TP

ER16-3.5TP

ER16-3.55TP

ER16-4TP

ER16-4.5TP

ER16-5TP

ER16-5.5TP

ER16-6TP

ER16-6.3TP

ER16-7TP

ER16-8TP

ER16-8.5TP

ER16-9TP

ER16-10TP

DIN - 352

DIN - 371

DIN - 362

ER20-2.24TP

ER20-2.5TP

DIN - 529

ER20-2.8TP

M5.5

M7

ER20-3.15TP

ER20-3.5TP

ER20-3.55TP

ER20-4TP

ER20-4.5TP

ER20-5TP

ER20-5.5TP

ER20-6TP

ER20-6.2TP

ER20-6.3TP

ER20-7TP

ER20-8TP

ER20-8.5TP

ER20-9TP

ER20-10TP

ER20-10.5TP

ER20-11TP

ER20-11.2TP

ER20-12TP

ER20-12.5TP

ER20-13TP

M15

M17

ER16-6.2TP

A253 E R 钢性攻牙筒夹

ER25-2.24TP

ER25-12.5TP

ER25-13TP

ER25-2.5TP

ER25-2.8TP

ER25-3.15TP

ER25-3.5TP

ER25-3.55TP

ER25-4TP

ER25-4.5TP

ER25-5TP

ER25-5.5TP

ER25-6TP

ER25-6.2TP

ER25-6.3TP

ER25-7TP

ER25-8TP

ER25-8.5TP

ER25-9TP

ER25-10TP

ER25-10.5TP

ER25-11TP

ER25-11.2TP

ER25-12TP

ER25-14TP

ER25-15TP

ER25-16TP

ER32-2.24TP

ER32-2.5TP

ER32-2.8TP

ER32-3.15TP

ER32-3.5TP

ER32-3.55TP

ER32-4TP

ER32-4.5TP

ER32-5TP

ER32-5.5TP

ER32-6TP

ER32-6.2TP

ER32-6.3TP

ER32-7TP

ER32-8TP

ER32-8.5TP

A254

8.5 E R 钢性攻牙筒夹

ER32-14TP

ER32-15TP

ER32-16TP

ER32-17TP

M25

M26

DIN - 736

ER32-10TP

ER32-10.5TP

ER32-11TP

ER32-11.2TP

ER32-12TP

ER32-12.5TP

ER32-13TP

ER32-18TP

ER32-19TP

ER32-20TP

ER40-5.5TP

ER40-6TP

ER40-2.24TP

ER40-2.5TP

ER40-2.8TP

ER40-3.15TP

ER40-3.5TP

ER40-3.55TP

ER40-4TP

ER40-4.5TP

ER40-5TP

ER40-6.3TP

ER40-7TP

ER40-8TP

ER40-8.5TP

ER40-9TP

ER40-10TP

ER40-10.5TP

ER40-11TP

ER40-11.2TP

ER40-14TP

ER40-15TP

ER40-16TP

ER40-17TP

ER40-12TP

ER40-13TP

ER40-6.2TP

ER40-12.5TP

ER40-18TP

ER40-19TP

ER40-20TP

ER32-9TP

A255 PAA

Precision Accessories and Add-ons E R A 级 弹性筒夹套装组

PAT.NO: 3108255

PAT.NO: M266126

DIN-6499

ER A GRADE COLLET SET

- 表面粗糙度 RA0.25,提升刀杆与螺帽贴合度,增强稳定性

- 表面特殊处理,具较佳防鏽功能,延长使用寿命

- 夹持精度 0.01mm 内

- 夹持力提升 15%

- Surface roughness Ra 0.25, improves the fitness between chuck

and nut and increases the stabilities.

- Special surface treatment provides a better rust-proofing and

extend the life cycle.

- Clamping accuracy is within 0.01mm.

- Clamping force improved up by 15%.

Collet Size

Qty.

ER16-A-6P-SET

1,2,4,6,8,10

ER20-A-6P-SET

2,4,6,8,10,12

ER16-A-10P-SET

1,2,3,4,5,6,7,8,9,10

ER20-A-12P-SET

2,3,4,5,6,7,8,9,10,11,12,13

E R 筒夹木盘

ER COLLET WOODEN TRAYS

数量 ( 孔 )

ER8-MV

ER11-MV

ER16-MV

ER20-MV

ER25-MV

ER32-MV

340

ER40-MV

265

ER50-MV

235

A257 E R 弹 性筒夹

ER COLLET

- 材质 :SUJ2。( 高碳轴承钢 : 在热处理后,具有坚韧的硬度与

韧性,更好的耐磨耗性,且弹性佳使用寿命更长 )

- 同心度按 DIN 标准规范全数检验,共计有三种精度等级,普

通级 0.02mm、A 级 0.01mm 及 UP 级 0.005mm

- UP 级建议配合 HSP 螺帽使用,其稳定性更好

- 用于夹持鑽头、螺丝攻、铣刀、铰刀等工具

- 具有弹性伸缩的功能、应用范围广、附变化性

- 订购时请告知所需精度等级

尺寸范围

-Steel:SUJ2(High-carbon bearing steel : After heat treatment, it has

hardness and toughness, better grinding quality, good flexibility,

and longer using life span.)

- Surface roughness : within RZ2.5.

- The cincentricity is totally examined according to DIN norm. There

are three kinds of classes for precision : general class 0.02mm, A

class 0.01mm, and UP class 0.005mm.

- UP class is recommended to be used with HSP clamping nut. It will

have better stability.

- It us used for the cutting tools loke drills, taps ,mills, and remers ,

etc.

- It has flexibility and can be applied widely and variably.

-Please inform the required precision when ordering.

ER8

1~5.0

1~7.0

3.8

1~10.0

20.8

13.8

0.03

1~13.0

23.9

6.36

2~16.0

25.9

6.66

2~20.0

30.9

7.16

29.2

3~26.0

7.66

36.2

6~34.0

46.0

ER 弹性筒夹

E R- EO 止 水 筒 夹

ER-EO COOLANT COLLET

BT/ER 刀杆

E R- ES 斜 槽 止 水 筒 夹

ER-ES STEEL SEALED COLLET

ER 刚性攻牙筒夹

d2 E R 弹 性筒夹

精度 ( 普通级 )Accuracy : 0.02mm

ER8-1

精度等级

Precision

1~0.5

ER16-7

ER8-1.5

1.5~1

ER16-7.5

ER8-2

2~1.5

ER16-8

ER8-2.5

2.5~2

ER16-8.5

ER8-3

3~2.5

ER16-9

ER16-9.5

ER8-3.5

3.5~3

ER8-4

4~3.5

ER8-4.5

4.5~4

ER8-5

5~4.5

3~2

8.5~7.5

ER25-3.5

9~8

ER25-4

9.5~8.5

ER25-4.5

ER25-5

10~9

ER25-5.5

ER25-6

ER25-6.5

ER25-7

ER25-8

ER25-8.5

ER25-9

ER25-9.5

3.5~2.5

ER25-10

4~3

ER25-10.5

4.5~3.5

ER25-11

5~4

ER25-11.5

5.5~4.5

ER25-12

6~5

ER25-12.5

6.5~5.5

ER25-13

ER11-2

ER20-3

ER11-2.5

ER20-3.5

ER11-3

ER20-4

ER11-3.5

ER20-4.5

ER11-4

ER20-5

ER11-4.5

ER20-5.5

ER11-5

ER20-6

ER11-5.5

5.5~5

ER20-6.5

ER11-6

6~5.5

ER20-7

ER25-13.5

ER25-14

8~7

ER25-14.5

ER25-15

ER25-15.5

ER20-9.5

ER25-16

ER20-10

10.5~9.5

11~10

11.5~10.5

12~11

12.5~11.5

13~12

6.5~6

ER11-7

7~6.5

ER20-8

ER20-8.5

ER20-9

Clamp Range Precision

ER16-1

ER20-10.5

ER16-1.5

ER20-11

ER16-2

ER20-11.5

ER16-2.5

ER20-12

ER20-12.5

ER20-13

ER25-1.5

7~6

7.5~6.5

13.5~12.5

14~13

14.5~13.5

15~14

ER32-2

ER32-2.5

ER32-3

ER32-4

ER32-4.5

ER32-5.5

ER32-6

16~15

ER32-3.5

ER25-1

15.5~14.5

ER11-6.5

ER25-7.5

ER20-7.5

ER16-6.5

ER25-3

ER20-2.5

ER16-6

ER25-2.5

ER16-5.5

ER16-5

ER20-1.5

ER11-1.5

ER16-4.5

ER16-4

ER25-2

ER16-3.5

ER20-1

ER11-1

ER16-3

ER20-2

ER16-10

ER32-5

A259 E R 弹 性筒夹

ER32-6.5

ER32-7

ER32-7.5

ER32-8

ER32-8.5

ER32-9

ER32-9.5

ER32-10

ER32-10.5

ER32-11

ER32-11.5

ER32-12

ER32-12.5

ER32-13

ER32-13.5

ER32-14

ER32-14.5

ER32-15

ER32-15.5

ER32-16

ER32-16.5

ER32-17

ER32-17.5

ER32-18

ER32-18.5

ER32-19

ER32-19.5

ER32-20

ER40-8

ER40-8.5

ER40-9

ER40-3

ER40-3.5

ER40-4

ER40-4.5

ER40-5

ER40-5.5

ER40-6

ER40-6.5

ER40-7

ER40-7.5

A260

ER50-6

ER50-7

ER50-8

ER40-9.5

ER50-9

ER40-10

ER50-10

ER50-11

11~9

ER50-12

12~10

ER50-13

13~11

ER50-14

14~12

ER50-15

15~13

ER50-16

16~14

ER50-17

17~15

ER40-10.5

ER40-11

ER40-11.5

ER40-12

ER40-12.5

ER40-13

ER40-13.5

ER40-14

ER40-14.5

ER40-15

ER40-15.5

ER40-16

ER40-16.5

ER40-17

ER40-17.5

16.5~15.5

ER40-18

17~16

ER40-18.5

17.5~16.5

ER40-19

18~17

ER40-19.5

18.5~17.5

ER40-20

19~18

ER40-20.5

19.5~18.5

ER40-21

20~19

ER40-21.5

ER40-22

ER40-22.5

ER40-23

ER40-23.5

ER40-24

ER40-24.5

ER40-25

ER40-25.5

ER40-26

ER50-18

18~16

ER50-19

19~17

ER50-20

20~18

ER50-21

21~19

ER50-22

22~20

ER50-23

23~21

ER50-24

24~22

ER50-25

25~23

ER50-26

26~24

ER50-27

27~25

ER50-28

28~26

ER50-29

29~27

ER50-30

30~28

20.5~19.5

ER50-31

31~29

21~20

ER50-32

32~30

21.5~20.5

ER50-33

33~31

22~21

ER50-34

34~32

22.5~21.5

23~22

23.5~22.5

24~23

24.5~23.5

25~24

25.5~24.5

26~25

0.02 E R 弹 性筒夹

精度 (A 级 )Accuracy : 0.01mm

ER8-A

ER16-A

ER8-1-A

ER8-1.5-A

ER16-7.5-A

ER16-8-A

ER16-7-A

ER8-2-A

ER8-2.5-A

ER16-8.5-A

ER16-9-A

ER25-A

ER25-2-A

ER25-2.5-A

ER25-3-A

ER25-3.5-A

ER25-4-A

ER8-3-A

ER8-3.5-A

ER16-9.5-A

ER25-4.5-A

ER16-10-A

ER25-5-A

ER8-4-A

ER8-4.5-A

ER25-5.5-A

ER25-6-A

ER8-5-A

ER11-A

ER20-A

ER20-1-A

ER20-1.5-A

ER20-2-A

ER11-1.5-A

ER20-2.5-A

ER11-2-A

ER20-3-A

ER11-2.5-A

ER20-3.5-A

ER11-3-A

ER20-4-A

ER11-3.5-A

ER20-4.5-A

ER11-4-A

ER20-5-A

ER11-4.5-A

ER20-5.5-A

ER11-5-A

ER11-6-A

ER11-6.5-A

ER11-7-A

ER20-9.5-A

ER20-10-A

ER11-5.5-A

ER16-1-A

ER20-6.5-A

ER20-7-A

ER20-7.5-A

ER20-8-A

ER20-8.5-A

ER20-9-A

ER20-6-A

ER20-10.5-A

ER16-1.5-A

ER20-11-A

ER16-2-A

ER20-11.5-A

ER16-2.5-A

ER20-12-A

ER20-12.5-A

ER20-13-A

ER16-3-A

ER16-3.5-A

ER16-4-A

ER16-4.5-A

ER16-5-A

ER16-5.5-A

ER16-6-A

ER16-6.5-A

ER25-7-A

ER25-7.5-A

ER25-8-A

ER25-8.5-A

ER25-9-A

ER25-9.5-A

ER25-10-A

ER25-10.5-A

ER25-11-A

ER25-11.5-A

ER25-12-A

ER25-12.5-A

ER25-13-A

ER25-13.5-A

ER25-14-A

ER25-14.5-A

ER25-15-A

ER25-15.5-A

ER25-16-A

ER32-2-A

ER32-2.5-A

ER32-3-A

ER32-A

ER32-3.5-A

ER11-1-A

ER25-6.5-A

ER32-4-A

ER32-4.5-A

ER25-1-A

ER32-5.5-A

ER25-1.5-A

ER32-6-A

ER32-5-A

A261 E R 弹 性筒夹

ER32-6.5-A

ER32-7-A

ER32-7.5-A

ER32-8-A

ER40-A

ER40-8-A

ER40-8.5-A

ER40-9-A

ER50-A

ER50-6-A

ER50-7-A

ER50-8-A

ER40-9.5-A

ER50-9-A

ER40-10-A

ER50-10-A

ER40-10.5-A

ER50-11-A

ER32-9.5-A

ER40-11-A

ER32-10-A

ER40-11.5-A

ER40-12-A

ER40-12.5-A

ER40-13-A

ER40-13.5-A

ER40-14-A

ER40-14.5-A

ER40-15-A

ER40-15.5-A

ER40-16-A

ER40-16.5-A

ER40-17-A

ER32-8.5-A

ER32-9-A

ER32-10.5-A

ER32-11-A

ER32-11.5-A

ER32-12-A

ER32-12.5-A

ER32-13-A

ER32-13.5-A

ER32-14-A

ER32-14.5-A

ER32-15-A

ER32-15.5-A

ER32-16-A

ER32-16.5-A

ER32-17-A

ER32-17.5-A

ER32-18-A

ER32-18.5-A

ER32-19-A

ER32-19.5-A

ER32-20-A

ER40-17.5-A

ER40-18-A

ER40-18.5-A

ER40-19-A

ER40-19.5-A

ER40-20-A

ER40-20.5-A

ER40-21-A

ER40-21.5-A

ER40-22-A

ER40-3-A

ER40-3.5-A

ER40-4-A

ER40-4.5-A

ER40-5-A

ER40-5.5-A

ER40-6-A

ER40-6.5-A

ER40-7-A

ER40-7.5-A

A262

ER40-22.5-A

ER40-23-A

ER40-24-A

ER40-24.5-A

ER40-25-A

ER40-25.5-A

ER40-26-A

ER40-23.5-A

ER50-12-A

ER50-13-A

ER50-14-A

ER50-15-A

ER50-16-A

ER50-17-A

ER50-18-A

ER50-19-A

ER50-20-A

ER50-21-A

ER50-22-A

ER50-23-A

ER50-24-A

ER50-25-A

ER50-26-A

ER50-27-A

ER50-28-A

ER50-29-A

ER50-30-A

ER50-31-A

ER50-32-A

ER50-33-A

ER50-34-A

0.01 E R 弹 性筒夹

精度 (UP 级 )Accuracy : 0.005mm

ER16-UP

ER8-UP

ER8-1-UP

ER16-7-UP

ER8-1.5-UP

ER16-7.5-UP

ER8-2-UP

ER16-8-UP

ER25-UP

ER25-2-UP

ER25-2.5-UP

ER25-3-UP

ER25-3.5-UP

ER25-4-UP

ER8-2.5-UP

ER16-8.5-UP

ER8-3-UP

ER16-9-UP

ER8-3.5-UP

ER16-9.5-UP

ER25-4.5-UP

ER8-4-UP

ER16-10-UP

ER25-5-UP

ER8-4.5-UP

ER8-5-UP

ER20-UP

ER11-UP

ER25-5.5-UP

ER25-6-UP

ER20-1-UP

ER20-1.5-UP

ER20-2-UP

ER11-1.5-UP

ER20-2.5-UP

ER20-9.5-UP

ER20-10-UP

ER11-2-UP

ER20-3-UP

ER11-2.5-UP

ER20-3.5-UP

ER11-3-UP

ER20-4-UP

ER11-3.5-UP

ER20-4.5-UP

ER11-4-UP

ER20-5-UP

ER11-4.5-UP

ER20-5.5-UP

ER11-5-UP

ER20-6-UP

ER11-5.5-UP

ER20-6.5-UP

ER11-6-UP

ER20-7-UP

ER11-6.5-UP

ER20-7.5-UP

ER11-7-UP

ER20-8-UP

ER20-8.5-UP

ER20-9-UP

ER16-1-UP

ER16-1.5-UP

ER16-2-UP

ER16-2.5-UP

ER16-3-UP

ER16-3.5-UP

ER16-4-UP

ER16-4.5-UP

ER16-5-UP

ER16-5.5-UP

ER16-6-UP

ER16-6.5-UP

ER20-10.5-UP

ER20-11-UP

ER20-11.5-UP

ER20-12-UP

ER20-12.5-UP

ER20-13-UP

ER25-7-UP

ER25-7.5-UP

ER25-8-UP

ER25-8.5-UP

ER25-9-UP

ER25-9.5-UP

ER25-10-UP

ER25-10.5-UP

ER25-11-UP

ER25-11.5-UP

ER25-12-UP

ER25-12.5-UP

ER25-13-UP

ER25-13.5-UP

ER25-14-UP

ER25-14.5-UP

ER25-15-UP

ER25-15.5-UP

ER25-16-UP

ER11-1-UP

ER25-6.5-UP

ER32-UP

ER32-2-UP

ER32-2.5-UP

ER32-3-UP

ER32-3.5-UP

ER32-4-UP

ER32-4.5-UP

ER32-5-UP

ER32-5.5-UP

ER32-6-UP

A263 E R 弹 性筒夹

ER32-6.5-UP

ER32-7-UP

ER32-7.5-UP

ER32-8-UP

ER40-UP

ER40-8-UP

ER40-8.5-UP

ER40-9-UP

ER50-UP

ER50-6-UP

ER50-7-UP

ER50-8-UP

ER40-9.5-UP

ER50-9-UP

ER40-10-UP

ER50-10-UP

ER40-10.5-UP

ER50-11-UP

ER32-9.5-UP

ER40-11-UP

ER32-10-UP

ER40-11.5-UP

ER40-12-UP

ER40-12.5-UP

ER40-13-UP

ER40-13.5-UP

ER40-14-UP

ER40-14.5-UP

ER40-15-UP

ER40-15.5-UP

ER40-16-UP

ER32-8.5-UP

ER32-9-UP

ER32-10.5-UP

ER32-11-UP

ER32-11.5-UP

ER32-12-UP

ER32-12.5-UP

ER32-13-UP

ER32-13.5-UP

ER32-14-UP

ER32-14.5-UP

ER32-15-UP

ER32-15.5-UP

ER32-16-UP

ER32-16.5-UP

ER32-17-UP

ER32-17.5-UP

ER32-18-UP

ER32-18.5-UP

ER32-19-UP

ER32-19.5-UP

ER32-20-UP

ER40-16.5-UP

ER40-17-UP

ER40-17.5-UP

ER40-18-UP

ER40-18.5-UP

ER40-19-UP

ER40-19.5-UP

ER40-20-UP

ER40-20.5-UP

ER40-21-UP

ER40-21.5-UP

ER40-22-UP

ER40-3-UP

ER40-3.5-UP

ER40-4-UP

ER40-4.5-UP

ER40-5-UP

ER40-5.5-UP

ER40-6-UP

ER40-6.5-UP

ER40-7-UP

ER40-7.5-UP

A264

ER40-22.5-UP

ER40-23-UP

ER40-24-UP

ER40-24.5-UP

ER40-23.5-UP

ER40-25-UP

ER40-25.5-UP

ER40-26-UP

ER50-12-UP

ER50-13-UP

ER50-14-UP

ER50-15-UP

ER50-16-UP

ER50-17-UP

ER50-18-UP

ER50-19-UP

ER50-20-UP

ER50-21-UP

ER50-22-UP

ER50-23-UP

ER50-24-UP

ER50-25-UP

ER50-26-UP

ER50-27-UP

ER50-28-UP

ER50-29-UP

ER50-30-UP

ER50-31-UP

ER50-32-UP

ER50-33-UP

ER50-34-UP

0.005 E R 弹 性筒夹

ER COLLET INCH SIZE

ER8-1/16

0.043"~0.062"

ER20-1/16

ER32-1/16

ER40-1/8

0.086"~0.125"

0.117"~0.156"

ER8-1/8

ER20-3/32

0.054"~0.093"

ER32-3/32

ER40-5/32

ER8-3/16

0.148"~0.187"

ER20-1/8

ER32-1/8

ER40-3/16

ER40-7/32

0.179"~0.218"

ER40-1/4

0.211"~0.250"

ER40-9/32

0.242"~0.281"

ER40-5/16

0.283"~0.312"

ER40-11/32

0.304"~0.343"

ER40-3/8

0.336"~0.375"

ER20-5/32

ER32-5/32

ER20-3/16

ER32-3/16

ER20-7/32

ER32-7/32

ER20-1/4

ER32-1/4

ER20-9/32

ER32-9/32

ER11-1/16

ER20-5/16

ER32-5/16

ER11-3/32

ER40-13/32

0.367"~0.406"

ER20-11/32

ER32-11/32

ER11-1/8

ER40-7/16

0.398"~0.437"

ER20-3/8

ER32-3/8

ER40-15/32

0.429"~0.468"

ER11-5/32

ER20-13/32

ER32-13/32

ER40-1/2

0.461"~0.500"

ER11-3/16

ER20-7/16

ER32-7/16

ER40-17/32

0.492"~0.531"

ER11-7/32

ER20-15/32

ER32-15/32

ER40-9/16

0.523"~0.562"

ER11-1/4

ER40-19/32

0.554"~0.593"

ER40-5/8

0.586"~0.625"

ER40-21/32

0.617"~0.656"

ER40-11/16

0.648"~0.687"

ER40-23/32

0.679"~0.718"

ER40-3/4

0.711"~0.750"

ER20-1/2

ER32-17/32

ER32-9/16

ER32-19/32

ER32-5/8

ER32-1/2

ER16-1/16

ER25-3/32

ER32-21/32

ER40-7/8

0.836"~0.875"

ER16-3/32

ER25-1/8

ER32-11/16

ER40-1

0.961"~1.00"

ER16-1/8

ER25-5/32

ER32-23/32

ER16-5/32

ER25-3/16

ER32-3/4

ER16-3/16

ER25-7/32

ER16-7/32

ER25-1/4

ER16-1/4

ER25-9/32

ER16-9/32

ER25-5/16

ER50-7/23

0.179"~0.219"

ER50-1/4

ER50-5/16

0.273"~0.313"

ER50-11/32

0.304"~0.344"

ER50-3/8

ER50-7/16

0.359"~0.438"

ER50-17/32

0.453"~0.531"

ER25-11/32

ER16-11/32

ER25-3/8

ER16-3/8

ER25-13/32

ER16-13/32

ER25-7/16

ER25-15/32

ER25-1/2

ER50-5/8

0.546"~0.625"

ER25-17/32

ER50-11/16

0.609"~0.688"

ER25-9/16

ER50-25/32

0.703"~0.781"

ER25-19/32

ER50-27/32

0.765"~0.844"

ER25-5/8

ER50-15/16

0.859"~0.938"

ER50-1

0.921"~1.000"

ER50-1-3/32

1.015"~1.094"

ER50-1-3/16

1.109"~1.188"

ER50-1-1/4

1.171"~1.250"

ER50-1-5/16

1.234"~1.313"

- 以上规格皆有普通级 0.02mm、A 级 0.01mm 及 UP 级 0.005mm

三种精度等级可选购,订购时请告知所需精度等级。

-The above specifications individually ordinary grade 0.02mm, A grade

0.01mm and 0.005mm UP grade. Three kinds of precision grade optional,

please advise when ordering the required accuracy grade.

A265

ER16-5/16

ER50 E R-FI D 出水筒夹

ER-FID COOLANT COLLET

ER16-FID

ER32-FID

FID-ER16-3

FID-ER16-4

FID-ER16-5

FID-ER16-6

FID-ER16-7

ER40-FID

FID-ER32-3

FID-ER32-4

FID-ER32-5

FID-ER32-6

ER20-FID

FID-ER40-4

FID-ER40-5

FID-ER40-6

FID-ER40-7

FID-ER32-7

FID-ER40-8

FID-ER32-8

FID-ER40-9

FID-ER32-9

FID-ER40-10

FID-ER32-10

FID-ER40-11

FID-ER32-11

FID-ER40-12

FID-ER20-3

FID-ER32-12

FID-ER40-13

FID-ER20-4

FID-ER32-13

FID-ER40-14

FID-ER20-5

FID-ER32-14

FID-ER40-15

FID-ER20-6

FID-ER32-15

FID-ER40-16

FID-ER20-7

FID-ER32-16

FID-ER40-17

FID-ER20-8

FID-ER32-17

FID-ER40-18

FID-ER20-9

FID-ER32-18

FID-ER40-19

FID-ER32-19

FID-ER40-20

FID-ER32-20

FID-ER40-21

ER25-FID

FID-ER40-22

FID-ER40-23

FID-ER25-3

FID-ER40-24

FID-ER25-4

FID-ER40-25

FID-ER25-5

FID-ER40-26

FID-ER25-6

FID-ER25-7

FID-ER25-8

FID-ER25-9

FID-ER25-10

FID-ER25-11

FID-ER25-12

FID-ER25-13

FID-ER25-14

A266 E R-FOD 出水筒夹

ER-FOD COOLANT COLLET

ER16-FOD

ER32-FOD

FOD-ER32-3

FOD-ER32-4

FOD-ER16-5

FOD-ER16-6

FOD-ER16-7

FOD-ER16-3

FOD-ER16-4

FOD-ER40-4

FOD-ER40-5

FOD-ER32-5

FOD-ER40-6

FOD-ER32-6

FOD-ER40-7

FOD-ER32-7

FOD-ER40-8

ER20-FOD

FOD-ER20-3

FOD-ER20-4

FOD-ER20-5

FOD-ER20-6

ER40-FOD

FOD-ER32-8

FOD-ER40-9

FOD-ER32-9

FOD-ER40-10

FOD-ER32-10

FOD-ER40-11

FOD-ER32-11

FOD-ER40-12

FOD-ER40-13

FOD-ER32-12

FOD-ER32-13

FOD-ER40-14

FOD-ER32-14

FOD-ER40-15

FOD-ER32-15

FOD-ER40-16

FOD-ER32-16

FOD-ER40-17

FOD-ER32-17

FOD-ER40-18

FOD-ER20-8

FOD-ER32-18

FOD-ER40-19

FOD-ER32-19

FOD-ER40-20

FOD-ER32-20

FOD-ER40-21

FOD-ER40-22

FOD-ER40-23

FOD-ER40-24

FOD-ER40-25

FOD-ER40-26

FOD-ER20-9

ER25-FOD

FOD-ER25-3

FOD-ER25-4

FOD-ER25-5

FOD-ER25-6

FOD-ER25-7

FOD-ER25-8

FOD-ER25-9

FOD-ER25-10

FOD-ER25-11

FOD-ER25-12

FOD-ER25-13

FOD-ER25-14

ER50-FOD

FOD-ER50-6

FOD-ER50-21

FOD-ER50-7

FOD-ER50-22

FOD-ER50-8

FOD-ER50-23

FOD-ER20-7

FOD-ER50-9

FOD-ER50-24

FOD-ER50-10

FOD-ER50-25

FOD-ER50-11

FOD-ER50-26

FOD-ER50-12

FOD-ER50-27

FOD-ER50-13

FOD-ER50-28

FOD-ER50-14

FOD-ER50-29

FOD-ER50-15

FOD-ER50-30

FOD-ER50-16

FOD-ER50-31

FOD-ER50-17

FOD-ER50-32

FOD-ER50-18

FOD-ER50-33

FOD-ER50-19

FOD-ER50-34

FOD-ER50-20

A267 E R-E O 止 水筒夹

PAT.NO: M285418

PAT.NO: 67748

ER-EO SEALED COLLET

- 材质 :SUJ-2。

- 偏摆精度 <0.02mm

ER16EO

- 利用沟槽的差异,以及垫圈 (Sealed

ring 封环 ) 的应用,达到周围止水,仅

中心出水的功用

- 适合于夹持出水孔的刀具

- 可承受水压达 21kgf/cm2

- 无弹性 ( 没有弹性夹持范围,需看大

夹持范围 )

- 非标准孔径如英制尺寸或是点数规格可

接受订製

- 专利在案

Steel:SUJ - 2

Taper:8°

HRC46°

Surface Roughness:RZ 2.5

Precision : within<0.02mm.

ER20EO

ER16EO-03

ER20EO-03

ER16EO-04

ER16EO-05

ER20EO-04

ER20EO-05

ER16EO-06

ER20EO-06

ER16EO-07

ER20EO-07

ER16EO-08

ER20EO-08

ER16EO-09

ER20EO-09

ER16EO-10

ER20EO-10

ER20EO-11

ER20EO-12

ER20EO-13

ER32EO

ER32EO-03

ER32EO-04

- Take use of the difference of flute and the

use of sealed ring to attain surrounding

coolant and provide center as water outlet.

- Useful to chuck cutting tools with water outlet.

- Can bear the water pressure up to 21kgf/cm2.

- No flexibility (NO flexible chucking range. It

depends on the biggest chucking range).

- Non-standard type, such as inch type or

decimal type, are welcomed to order.

- Has a patent.

ER40EO

ER40EO-03

ER40EO-04

ER40EO-05

ER40EO-06

ER40EO-07

ER25EO

ER40EO-08

ER40EO-09

ER40EO-10

ER40EO-11

ER32EO-05

ER32EO-06

ER40EO-12

ER32EO-07

ER25EO-03

ER40EO-13

ER32EO-08

ER25EO-04

ER40EO-14

ER32EO-09

ER25EO-05

ER40EO-15

ER32EO-10

ER25EO-06

ER40EO-16

ER32EO-11

ER25EO-07

ER40EO-17

ER32EO-12

ER25EO-08

ER40EO-18

ER32EO-13

ER25EO-09

ER40EO-19

ER32EO-14

ER25EO-10

ER40EO-20

ER32EO-15

ER25EO-11

ER40EO-21

ER32EO-16

ER25EO-12

ER40EO-22

ER32EO-17

ER25EO-13

ER40EO-23

ER32EO-18

ER25EO-14

ER40EO-24

ER32EO-19

ER25EO-15

ER40EO-25

ER32EO-20

ER25EO-16

ER40EO-26

Spec. E R-E S 斜槽止水筒夹

PAT.NO: M311516

PAT.NO: 3124650

PAT.NO: 696264

ER25ES

ER16ES

ER16ES-03

ER16ES-04

ER25ES-09

ER25ES-10

ER20ES 31.5 23.9 6.36 4.8

20.6 1.0~13.0 20

25.9 6.66

25.6 1.0~16.0 25

ER16ES 27.5 20.8 6.25

16.6 0.5~10.0 16

ER16ES-05

ER25ES-11

ER16ES-06

ER25ES-12

ER32ES

30.9 7.16 5.5

32.6 2.0~20.0 32

ER16ES-07

ER25ES-13

ER40ES

34.9 7.66

40.6 3.0~26.0 40

ER16ES-08

ER25ES-14

ER16ES-09

ER25ES-15

ER16ES-10

ER25ES-16

ER20ES

ER40ES-03

ER40ES-04

ER40ES-05

ER20ES-03

ER32ES-03

ER40ES-06

ER20ES-04

ER32ES-04

ER40ES-07

ER20ES-05

ER32ES-05

ER40ES-08

ER32ES-06

ER20ES-07

ER32ES-07

ER40ES-10

ER20ES-08

ER32ES-08

ER40ES-11

ER20ES-09

ER32ES-09

ER40ES-12

ER20ES-10

ER32ES-10

ER40ES-13

ER20ES-11

ER32ES-11

ER40ES-14

ER20ES-12

ER32ES-12

ER40ES-15

ER20ES-13

ER25ES-03

ER25ES-04

ER25ES-05

ER25ES-06

ER25ES-07

ER25ES-08

ER32ES-13

ER40ES-16

ER32ES-14

ER40ES-17

ER32ES-15

ER40ES-18

ER32ES-16

ER40ES-19

ER32ES-17

ER40ES-20

ER32ES-18

ER40ES-21

ER32ES-19

ER40ES-22

ER40ES-23

ER40ES-24

ER40ES-25

ER40ES-26

ER32ES-20

ER20ES-06

ER40ES-09

A269 P N 筒夹

PN COLLET

PN16

16.8

PN20

PN25

3.6

25.8

PN32

32.7

PN40

34.5

40.85

PN16-03

PN20-03

PN25-03

PN16-04

PN20-04

PN25-04

PN16-05

PN20-05

PN25-05

PN16-06

PN20-06

PN25-06

PN16-07

PN20-07

PN25-07

PN16-08

PN20-08

PN25-08

PN16-09

PN20-09

PN25-09

PN16-10

PN20-10

PN25-10

PN20-11

PN25-11

PN20-12

PN25-12

PN20-13

PN25-13

PN25-14

PN25-15

PN25-16

PN32-03

PN32-04

PN32-05

PN40-06

PN40-21

PN40-07

PN40-22

PN40-08

PN40-23

PN40-09

PN40-24

PN32-09

PN40-10

PN40-25

PN32-10

PN40-11

PN40-26

PN32-11

PN40-12

PN32-12

PN40-13

PN40-14

PN32-14

PN40-15

PN32-15

PN40-16

PN32-16

PN40-17

PN40-18

PN40-19

PN32-19

PN40-20

PN32-20

PN32-06

PN32-07

PN32-08

PN32-13

PN32-17

PN32-18

- 另有英制规格可选购 Another Inch specifications purchase. P N -E S 斜槽止水筒夹

PN-ES STEEL SEALED COLLET

PN16ES

PN20ES

PN25ES

PN32ES

PN40ES

PN16ES-03

PN20ES-03

PN25ES-03

PN16ES-04

PN20ES-04

PN25ES-04

PN16ES-05

PN20ES-05

PN25ES-05

PN16ES-06

PN20ES-06

PN25ES-06

PN16ES-07

PN20ES-07

PN25ES-07

PN16ES-08

PN20ES-08

PN25ES-08

PN16ES-09

PN20ES-09

PN25ES-09

PN16ES-10

PN20ES-10

PN25ES-10

PN20ES-11

PN25ES-11

PN20ES-12

PN25ES-12

PN20ES-13

PN25ES-13

PN25ES-14

PN25ES-15

PN25ES-16

PN32ES-03

PN32ES-04

PN32ES-05

PN40ES-06

PN40ES-21

PN40ES-07

PN40ES-22

PN40ES-08

PN40ES-23

PN40ES-09

PN40ES-24

PN32ES-09

PN40ES-10

PN40ES-25

PN32ES-10

PN40ES-11

PN40ES-26

PN32ES-11

PN40ES-12

PN32ES-12

PN40ES-13

PN40ES-14

PN32ES-14

PN40ES-15

PN32ES-15

PN40ES-16

PN32ES-16

PN40ES-17

PN40ES-18

PN40ES-19

PN32ES-19

PN40ES-20

PN32ES-20

PN32ES-06

PN32ES-07

PN32ES-08

PN32ES-13

PN32ES-17

PN32ES-18

- 另有英制规格可选购 Another Inch specifications purchase.

A271 S KS 高 速机专用筒夹

SKS COLLET

精度 Accuracy : 5µm

- Precision:5µ (4D length)

- Used for clamping drills, mills, and reamers.

- Holds tool with a diameter difference under h7.

- When the inner diameter is under 3mm, the clamping capacity is

0.25mm.

- When the inner diameter is more 3mm, the clampingcapacity is 0.5mm.

- 可夹持鑽头、铣刀、铰刀

- 所挟持刀具柄径公差限定 h7 以内

- 孔径 3mm 以下弹性收缩 0.25mm

- 孔径 3mm 以上弹性收缩 0.5mm

SKS-6

21.4

9.26

SKS-13

39.1

33.6

SKS-16

SKS-20

54.3

24.9

SKS-25

SKS6-UP

SKS13-UP

2.75~3.0

SKS6-3.5-UP

3.0~3.5

SKS13-3.5-UP

SKS6-4-UP

3.5~4.0

SKS13-4-UP

SKS6-3-UP

SKS13-3-UP

0.05

SKS13-7-UP

6.5~7.0

SKS13-7.5-UP

7.0~7.5

SKS13-8-UP

7.5~8.0

SKS6-4.5-UP

4.0~4.5

SKS13-4.5-UP

SKS13-8.5-UP

8.0~8.5

SKS6-5-UP

4.5~5.0

SKS13-5-UP

SKS13-9-UP

8.5~9.0

SKS6-5.5-UP

5.0~5.5

SKS13-5.5-UP

SKS13-9.5-UP

9.0~9.5

SKS6-6-UP

5.5~6.0

SKS13-6-UP

SKS13-10-UP

9.5~10.0

SKS13-6.5-UP

6.0~6.5

SKS13-10.5-UP

10.0~10.5

SKS13-11-UP

10.5~11.0

SKS13-11.5-UP

11.0~11.5

SKS13-12-UP

11.5~12.0

SKS13-12.5-UP

12.0~12.5

SKS13-13-UP

12.5~13.0

0.03 S KS 高 速机专用筒夹

SKS20-UP

SKS16-UP

SKS16-3.5-UP

SKS16-4-UP

0.09

SKS16-4.5-UP

SKS16-5-UP

SKS16-5.5-UP

SKS16-6-UP

SKS16-6.5-UP

SKS16-7-UP

SKS16-7.5-UP

SKS16-8-UP

SKS16-8.5-UP

SKS16-9-UP

SKS16-9.5-UP

SKS16-10-UP

SKS16-10.5-UP

SKS16-11-UP

SKS16-11.5-UP

SKS16-12-UP

SKS16-12.5-UP

SKS16-13-UP

SKS16-13.5-UP

13.0~13.5

SKS16-14-UP

13.5~14.0

SKS16-14.5-UP

14.0~14.5

SKS16-15-UP

14.5~15.0

SKS16-15.5-UP

15.0~15.5

SKS16-16-UP

15.5~16.0

SKS16-3-UP

SKS20-3-UP

SKS20-3.5-UP

SKS20-4-UP

SKS20-4.5-UP

SKS20-5-UP

SKS20-5.5-UP

SKS20-6-UP

SKS20-6.5-UP

SKS20-7-UP

SKS20-7.5-UP

SKS20-8-UP

SKS20-8.5-UP

SKS20-9-UP

SKS20-9.5-UP

SKS20-10-UP

SKS20-10.5-UP

SKS20-11-UP

SKS20-11.5-UP

SKS20-12-UP

SKS20-12.5-UP

SKS20-13-UP

SKS20-13.5-UP

SKS20-14-UP

SKS20-14.5-UP

SKS20-15-UP

SKS20-15.5-UP

SKS20-16-UP

SKS20-16.5-UP

SKS20-17-UP

SKS20-17.5-UP

SKS20-18-UP

SKS20-18.5-UP

SKS20-19-UP

SKS20-19.5-UP

SKS20-20-UP

3.0~2.75

3.5~3.0

16.0~16.5

16.5~17.0

17.0~17.5

17.5~18.0

18.0~18.5

18.5~19.0

19.0~19.5

19.5~20.0

0.13

0.11

SKS25-3-UP

2.75~3

SKS25-4-UP

3.5~4

SKS25-6-UP

5.5~6

SKS25-8-UP

7.5~8

SKS25-10-UP

9.5~10

SKS25-12-UP

11.5~12

SKS25-16-UP

15.5~16

SKS25-16.5-UP

16~16.5

SKS25-17-UP

16.5~17

SKS25-17.5-UP

17~17.5

SKS25-18-UP

17.5~18

SKS25-18.5-UP

18~18.5

SKS25-19-UP

18.5~19

SKS25-19.5-UP

19~19.5

SKS25-20-UP

19.5~20

SKS25-20.5-UP

20~20.5

SKS25-21-UP

20.5~21

SKS25-21.5-UP

21~21.5

SKS25-22-UP

21.5~22

SKS25-22.5-UP

22~22.5

SKS25-23-UP

22.5~23

SKS25-23.5-UP

23~23.5

SKS25-24-UP

23.5~24

SKS25-24.5-UP

24~24.5

SKS25-25-UP

24.5~25

SKS25-25.4-UP

25~25.4

SKS25-UP

A273 S KX 高 速机专用筒夹

SKX COLLET

- Used for clamping tools of the same diameter.

- 夹持同柄径刀具专用

SKX-6

8.8

SKX-10

26.3

SKX-16

24.5

20.05

SKX-20

54.2

48.95

24.85

SKX-25

57.1

SKX6-3

SKX6-4

SKX6-5

SKX6-6

SKX10-3

SKX16-3

SKX10-4

SKX16-4

SKX10-5

SKX16-5

SKX10-6

SKX10-7

SKX16-7

SKX16-8

SKX10-9

SKX16-9

SKX10-10

SKX16-10

SKX16-11

SKX16-12

SKX16-13

SKX16-14

SKX16-15

SKX16-16

SKX16-6

SKX10-8

SKX20-3

SKX20-12

SKX25-3

SKX25-15

SKX20-4

SKX20-13

SKX25-4

SKX25-16

SKX20-5

SKX20-14

SKX25-5

SKX25-17

SKX20-6

SKX20-15

SKX25-6

SKX25-18

SKX20-7

SKX20-16

SKX25-7

SKX25-19

SKX20-8

SKX20-17

SKX25-8

SKX25-20

SKX20-9

SKX20-18

SKX25-9

SKX25-21

SKX20-10

SKX20-19

SKX25-10

SKX25-22

SKX20-11

SKX20-20

SKX25-11

SKX25-23

SKX25-12

SKX25-24

SKX25-13

SKX25-25

SKX25-14

A274 S KS 止 水筒夹

SKS SEALED COLLET

- 偏摆精度 :5μm

- 可承受水压 : 21kgf/cm2

- 具有更好的夹持力和刚性

- Precision: Within 5µm.

- Water pressure: 21kgf/cm2

- better clamping power and good rigidity.

SKS10-C

26.8

SKS13-C

SKS16-C

20.2

SKS20-C

SKS25-C

SKS13C-3

SKS16C-3

SKS13C-4

SKS16C-1/8

1/8

SKS13C-5

SKS16C-4

SKS13C-6

SKS16C-5

SKS10C-6

SKS13C-8

SKS16C-6

SKS10C-8

SKS13C-10

SKS16C-8

SKS10C-10

SKS13C-12

SKS16C-10

SKS13C-13

SKS16C-12

SKS16C-16

SKS10C-4

SKS10C-5

SKS10C-3

SKS10C-1/8

SKS20C-3

SKS25C-6

SKS20C-4

SKS25C-8

SKS20C-5

SKS25C-10

SKS20C-6

SKS25C-12

SKS20C-8

SKS25C-16

SKS20C-10

SKS25C-20

SKS20C-12

SKS25C-25

SKS20C-16

SKS25C-25.4

SKS20C-20

A275 S LC 专用筒夹

SLC-6

SLC-12

25.45

SLC-20

SLC-6-2

2.0

SLC-12-3

SLC-20-3

SLC-6-2.25

SLC-12-4

SLC-20-4

SLC-6-2.5

SLC-12-5

SLC-20-5

SLC-6-2.75

SLC-12-6

SLC-20-6

SLC-6-3

SLC-12-8

8.0

SLC-20-8

SLC-6-3.25

SLC-12-10

SLC-20-10

SLC-6-3.5

SLC-12-12

SLC-20-12

SLC-6-3.75

SLC-20-16

16.0

SLC-6-4

SLC-20-20

SLC-6-4.25

SLC-6-4.5

SLC-6-4.75

SLC-6-5

SLC-6-5.25

5.25

SLC-6-5.5

SLC-6-5.75

SLC-6-6

A276 直 式 弹性筒夹

STRAIGHT SHANK COLLET

精度 Accuracy : <0.02mm

- 偏摆精度小于 0.02mm

- 限定夹持与孔径相同之刀具柄径

- 筒夹不具备弹性收缩范围,强调夹持力

- 刀具置入筒夹必须超过内孔有效夹持长度,以达到有效夹持

筒夹孔径 d1

-Precision : within 0.02mm.

-Definition clamp and aperture same shank of tool diameter.

-The collet doesn't have the contraction scope, the emphasis

chucking power.

-In the cutting tool posts the collet to surpass the hole effective clamp length,

achieves the effective clamp.

SSC12

3, 4, 5, 6, 8

SSC16

3, 4, 5, 6, 8, 10, 12

SSC20

3, 4, 5, 6, 8, 10, 12, 16

SSC25

3, 4, 5, 6, 8, 10, 12, 16, 20

SSC32

3, 4, 5, 6, 8, 10, 12, 14, 16,18, 20, 24, 25

64.6

1/8, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1"

SSC42

3, 4, 5, 6, 8, 10, 12, 16, 20, 25, 32

1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1"

直 式 止水筒夹

STRAIGHT SEALED COLLET

- 可承受 21 kgf/cm2 水压

-Water pressure up to 21 kgf/cm2

SSC12-C

SSC20-C

SSC25-C

SSC32-C

3, 4, 5, 6, 8, 10, 12, 16, 20, 25

SSC42-C

52.9

49.4

50.5

A277 H YC 液 压套筒

HYC Hydraulic COLLET

- 筒夹具有深冷处理

-Collet have sub-zero treatment.

HYC12

HYC20

HYC32

HYC12-03

HYC20-03

HYC32-06

HYC12-04

HYC20-04

HYC32-08

HYC12-05

HYC20-05

HYC32-10

HYC12-06

HYC20-06

HYC32-12

HYC12-08

HYC20-07

HYC32-14

HYC20-08

HYC32-16

HYC20-09